Understanding melt pool characteristics as a means for reducing build layout quality variations in laser-based powder bed fusion: An approach toward spatial parameter compensations
Engineering Science in Additive Manufacturing · 2026
DOI: 10.36922/esam025420029 ↗Kurz gefasst
Fachartikel in der Zeitschrift Engineering Science in Additive Manufacturing, 2026. Verfasst von Jaivindra Singh und 6 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref).
Abstract (Originalsprache)
This study investigates the impact of build platform location on melt pool variability during laser-based powder bed fusion of metals. The incident angle and gas flow are hypothesized to influence melt pool penetration and contribute to spatial variations in the melt pool. Results show that the typical build strategy using the same material-dependent processing parameters for all parts throughout the build chamber produces parts with location-dependent properties. An overarching goal of the present work was to attempt to fabricate similar parts at different locations within the build chamber by identifying processing parameters that produce similar melt pool depths at these locations. It was further hypothesized that by normalizing process parameters through similar melt pool depths, similar porosity counts could be achieved at these locations, thus mitigating process-induced variability. The study emphasizes the necessity of spatial parameter adjustments to minimize variability across different locations within the build platform, as well as the requirement for uniform gas flow across the build chamber, thereby eliminating gas flow-dependent variations from the analysis.
Zitieren
APA
Singh, J., Oliveira, J. P., Taylor, H., Rivas, J., Mireles, J., Garcia, O., & Wicker, R. (2026). Understanding melt pool characteristics as a means for reducing build layout quality variations in laser-based powder bed fusion: An approach toward spatial parameter compensations. Engineering Science in Additive Manufacturing. https://doi.org/10.36922/esam025420029
Vancouver
Singh J, Oliveira JP, Taylor H, Rivas J, Mireles J, Garcia O, et al. Understanding melt pool characteristics as a means for reducing build layout quality variations in laser-based powder bed fusion: An approach toward spatial parameter compensations. Engineering Science in Additive Manufacturing. 2026. doi:10.36922/esam025420029
BibTeX
@article{Singh2026,
author = {Singh, Jaivindra and Oliveira, J. P. and Taylor, Hunter and Rivas, Jesus and Mireles, Jorge and Garcia, Oscar and Wicker, Ryan},
title = {Understanding melt pool characteristics as a means for reducing build layout quality variations in laser-based powder bed fusion: An approach toward spatial parameter compensations},
journal = {Engineering Science in Additive Manufacturing},
year = {2026},
doi = {10.36922/esam025420029}
}
EUVIMED