Analysis of Geometric Tolerances with Integration of Deviations Resulting from Additive Manufacturing (FDM): Case of Parallelism of a Plane Surface
Journal of Machine Engineering · 26.05.2026
DOI: 10.36897/jme/221715 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Machine Engineering, online erschienen am 26.05.2026. Verfasst von Ikram Kabbouri und 3 weiteren Autor:innen. Die Arbeit nennt 24 Literaturangaben.
Abstract (Originalsprache)
This study offers an updated overview of existing approaches used to model geometric deviations in additive manufacturing. It also proposes a new framework for representing part deviations by discretizing an ideal planar surface and accounting for both deterministic and stochastic sources of variation. Deterministic deviations are described through two main components: surface waviness and overall orientation. In contrast, stochastic deviations are introduced through automatically generated variations following a normal probability distribution. The second section of this work presents a numerical investigation of a prismatic component featuring a functional planar surface produced using the Fused Deposition Modeling (FDM) technique. As an initial step, a reference specimen is fabricated to verify essential parameters associated with the mathematical models used for the FDM process. The geometric deviation model relies on converting the nominal planar surface into a mesh of nodes, after which a deformed surface—representing the actual manufactured geometry is generated using the deviations computed by the proposed approach. Finally, a Monte Carlo analysis is performed to examine how these geometric variations influence the evaluation of surface parallelism tolerance. To support interpretation of the results, a correlation is established between the simulated deviations, the specified tolerance limits, and the resulting non conformity rate calculated for each tolerance range.
Zitieren
APA
Kabbouri, I., EL-QEMARY, A., mouhssine, C., & Boutahari, S. (2026). Analysis of Geometric Tolerances with Integration of Deviations Resulting from Additive Manufacturing (FDM): Case of Parallelism of a Plane Surface. Journal of Machine Engineering. https://doi.org/10.36897/jme/221715
Vancouver
Kabbouri I, EL-QEMARY A, mouhssine C, Boutahari S. Analysis of Geometric Tolerances with Integration of Deviations Resulting from Additive Manufacturing (FDM): Case of Parallelism of a Plane Surface. Journal of Machine Engineering. 2026. doi:10.36897/jme/221715
BibTeX
@article{Kabbouri2026,
author = {Kabbouri, Ikram and EL-QEMARY, ANASS and mouhssine, chahbouni and Boutahari, Said},
title = {Analysis of Geometric Tolerances with Integration of Deviations Resulting from Additive Manufacturing (FDM): Case of Parallelism of a Plane Surface},
journal = {Journal of Machine Engineering},
year = {2026},
doi = {10.36897/jme/221715}
}
EUVIMED