EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Optimisation of parameters laser cutting of oil palm fronds using fibre pulsed laser of 1064 Nm wavelength system

Mohd Ikmal Hafizi Azaman, Mohd Adzir Mahdi, Mohd Rizal Ahmad, Abd Rahim Shuib, Mohd Ramdhan Khalid, Mohd Azwan Bakri, Mohd Khairul Fadzly Md Radzi, Ahmad Syazwan Ramli

Advances in Agricultural and Food Research Journal · 2020

DOI: 10.36877/aafrj.a0000108 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advances in Agricultural and Food Research Journal, 2020. Verfasst von Mohd Ikmal Hafizi Azaman und 7 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Oil palm plantations produce fresh fruit bunches (FFB) as their primary output. Over the years, several technologies for cutting oil palm fronds and FFB have been developed and only a few of these technologies have been taken up by the industry. A study to explore the potential of fibre lasers as an alternative technology to cut oil palm fronds has been initiated where in this study laser cutting parameters using a 250 mm focus lens by manipulating power, speed and frequency are being optimised. The pulse fibre laser system used in this work operates at the wavelength and power of 1064 nm and 50 kW respectively where it is equivalent to 2 mJ of energy. Characterising and optimising the laser system with the 250 mm lens, an optimisation study is conducted in order to find a suitable working range for the fibre pulsed laser system to perform oil palm frond cutting. This study concludes that all three parameters; frequency, power and speed play huge roles in determining the quality and efficiency of the laser cutting. High frequency and speed with power above 80 % and 1 mm-1 will yield the desired results.

Zitieren

APA

Azaman, M. I. H., Mahdi, M. A., Ahmad, M. R., Shuib, A. R., Khalid, M. R., Bakri, M. A., Radzi, M. K. F. M., & Ramli, A. S. (2020). Optimisation of parameters laser cutting of oil palm fronds using fibre pulsed laser of 1064 Nm wavelength system. Advances in Agricultural and Food Research Journal. https://doi.org/10.36877/aafrj.a0000108

Vancouver

Azaman MIH, Mahdi MA, Ahmad MR, Shuib AR, Khalid MR, Bakri MA, et al. Optimisation of parameters laser cutting of oil palm fronds using fibre pulsed laser of 1064 Nm wavelength system. Advances in Agricultural and Food Research Journal. 2020. doi:10.36877/aafrj.a0000108

BibTeX
@article{Azaman2020,
  author = {Azaman, Mohd Ikmal Hafizi and Mahdi, Mohd Adzir and Ahmad, Mohd Rizal and Shuib, Abd Rahim and Khalid, Mohd Ramdhan and Bakri, Mohd Azwan and Radzi, Mohd Khairul Fadzly Md and Ramli, Ahmad Syazwan},
  title = {Optimisation of parameters laser cutting of oil palm fronds using fibre pulsed laser of 1064 Nm wavelength system},
  journal = {Advances in Agricultural and Food Research Journal},
  year = {2020},
  doi = {10.36877/aafrj.a0000108}
}
Kostenlos starten →