An Integrated Design Framework for Low-Carbon Reinforced Concrete Floor Systems: From Slab Typology to Beam Configuration
Engineering Future Sustainability · 2026
DOI: 10.36828/efs.412 ↗Kurz gefasst
Fachartikel in der Zeitschrift Engineering Future Sustainability, 2026. Verfasst von Chia Paknahad.
Abstract (Originalsprache)
Reinforced concrete floor systems account for up to 60% of total concrete volume in multi-storey buildings and represent a critical intervention point for embodied carbon reduction. While previous research has examined individual slab typologies or isolated design parameters, integrated guidance spanning both system selection and configuration optimisation remains limited. This paper presents a hierarchical decision framework for low-carbon RC floor design, synthesising results from two Eurocode 2–compliant parametric studies of a representative 3 × 3 bay reinforced concrete frame typical of multi-storey office buildings, using C32/40 concrete across three span bands: short (4–6 m), medium (8–10 m), and long (12–14 m). The framework operates at two sequential levels: (i) selection of slab typology, where flat slabs are most efficient for short spans while two-way joist slabs reduce embodied carbon by 25–35% and cost by up to about 35% for long spans; and (ii) configuration of beams within the two-way joist system, where beamless layouts are optimal for short spans and full-beam grids outperform alternatives for long spans. Results show that for short spans the flat slab without beams is the most efficient solution, for medium spans the two-way joist slab without beams provides the best balance of embodied carbon and cost, and for long spans the two-way joist slab with a full beam grid is optimal; adding a full beam grid reduces embodied carbon by approximately 11% compared with the beamless alternative at the longest spans. The combined guidance is presented as a span-dependent design matrix, offering practising engineers actionable recommendations at the concept-design stage and supporting decarbonisation targets in the built environment.
Zitieren
APA
Paknahad, C. (2026). An Integrated Design Framework for Low-Carbon Reinforced Concrete Floor Systems: From Slab Typology to Beam Configuration. Engineering Future Sustainability. https://doi.org/10.36828/efs.412
Vancouver
Paknahad C. An Integrated Design Framework for Low-Carbon Reinforced Concrete Floor Systems: From Slab Typology to Beam Configuration. Engineering Future Sustainability. 2026. doi:10.36828/efs.412
BibTeX
@article{Paknahad2026,
author = {Paknahad, Chia},
title = {An Integrated Design Framework for Low-Carbon Reinforced Concrete Floor Systems: From Slab Typology to Beam Configuration},
journal = {Engineering Future Sustainability},
year = {2026},
doi = {10.36828/efs.412}
}
EUVIMED