EUVIMEDEUVIMED entdecken
Crossref

Incorporating Ground Granulated Blast Furnace Slag & Fly Ash in Concrete Production for Sustainable Construction: A Review

Zeeshan Tariq

Engineering Future Sustainability · 2025

DOI: 10.36828/efs.318 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Engineering Future Sustainability, 2025. Verfasst von Zeeshan Tariq. Die Arbeit wurde bisher 4-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Portland cement is the primary source of CO₂ emissions in concrete production due to the energy required for the calcination of limestone, the release of CO₂ from fuel combustion during cement manufacturing, and the hydration process during setting. To mitigate the environmental challenges associated with cement production, the use of industrial waste as cementitious material can significantly reduce both the volume of waste generated and its disposal in landfills, thereby freeing up land for other purposes. Concrete has traditionally incorporated natural pozzolans, waste and recycled materials, and industrial byproducts as partial replacements for Portland cement. Among these, Ground Granulated Blast Furnace Slag (GGBFS) and Fly Ash (FA) are the most commonly used supplementary cementitious materials (SCMs), known for enhancing the mechanical strength, flow ability, and durability of concrete. SCMs improve the concrete matrix's resistance to chemical attacks, reduce permeability, and contribute to long-term strength development. This review highlights the scientific literature on the feasibility and effectiveness of using GGBFS and FA as sustainable alternatives to cement in mortar and concrete production. GGBFS is a byproduct of the iron-making process, while FA is a fine particulate material generated from coal-fired power plants. The paper presents a detailed discussion of their manufacturing processes, physical characteristics, and their impact when used as partial cement replacements. It also summarizes findings from previous studies regarding optimal replacement percentages, which vary depending on the source, mix design, and particle size distribution of the materials. Finally, this review proposes process improvement strategies to optimize the use of GGBFS and FA in future sustainable concrete applications.

Zitieren

APA

Tariq, Z. (2025). Incorporating Ground Granulated Blast Furnace Slag & Fly Ash in Concrete Production for Sustainable Construction: A Review. Engineering Future Sustainability. https://doi.org/10.36828/efs.318

Vancouver

Tariq Z. Incorporating Ground Granulated Blast Furnace Slag & Fly Ash in Concrete Production for Sustainable Construction: A Review. Engineering Future Sustainability. 2025. doi:10.36828/efs.318

BibTeX
@article{Tariq2025,
  author = {Tariq, Zeeshan},
  title = {Incorporating Ground Granulated Blast Furnace Slag & Fly Ash in Concrete Production for Sustainable Construction: A Review},
  journal = {Engineering Future Sustainability},
  year = {2025},
  doi = {10.36828/efs.318}
}
Kostenlos starten →