EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Bending Speed on Zinc-Coating Microcracking in Electrogalvanized Steel during Forced V-Bending

Danang Supriyanto, Sukarman Sukarman, Khoirudin Koirudin, Dodi Mulyadi, Amir Amir, Karyadi Karyadi, Nana Rahdiana

Jurnal Teknik Mesin Mechanical Xplore · 31.07.2026 · 7 (1) · 66-81

DOI: 10.36805/1rb56y51 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Jurnal Teknik Mesin Mechanical Xplore, online erschienen am 31.07.2026. Verfasst von Danang Supriyanto und 6 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Electrogalvanized (EG) steel is widely used in sheet components. However, bending deformation can damage the Zn coating and affect its protective properties. This study investigated the effect of punch speed on the deformation response and coating microcracking of EG steel during forced V-bending. Sheets with a thickness of 0.65 mm were bent using a 1.0 mm punch radius and a 30° V-die angle at speeds of 20, 30, and 40 mm/min. The punch force and displacement were recorded, and coating damage was examined using scanning electron microscopy and quantitative image analysis. Finite element analysis (FEA) was used to evaluate the deformation response. The results showed a transition from springback at 20 and 30 mm/min to spring-go at 40 mm/min. The maximum punch force changed only slightly, whereas the mean microcrack dimension increased from 5.61 ± 0.67 µm at 20 mm/min to 7.86 ± 1.18 µm at 40 mm/min. These findings indicate that a higher bending speed promoted more pronounced microcracking in the Zn coating.

Zitieren

APA

Supriyanto, D., Sukarman, S., Koirudin, K., Mulyadi, D., Amir, A., Karyadi, K., & Rahdiana, N. (2026). Effect of Bending Speed on Zinc-Coating Microcracking in Electrogalvanized Steel during Forced V-Bending. Jurnal Teknik Mesin Mechanical Xplore, 7(1), 66-81. https://doi.org/10.36805/1rb56y51

Vancouver

Supriyanto D, Sukarman S, Koirudin K, Mulyadi D, Amir A, Karyadi K, et al. Effect of Bending Speed on Zinc-Coating Microcracking in Electrogalvanized Steel during Forced V-Bending. Jurnal Teknik Mesin Mechanical Xplore. 2026;7(1):66-81. doi:10.36805/1rb56y51

BibTeX
@article{Supriyanto2026,
  author = {Supriyanto, Danang and Sukarman, Sukarman and Koirudin, Khoirudin and Mulyadi, Dodi and Amir, Amir and Karyadi, Karyadi and Rahdiana, Nana},
  title = {Effect of Bending Speed on Zinc-Coating Microcracking in Electrogalvanized Steel during Forced V-Bending},
  journal = {Jurnal Teknik Mesin Mechanical Xplore},
  year = {2026},
  volume = {7},
  number = {1},
  pages = {66--81},
  doi = {10.36805/1rb56y51}
}
Kostenlos starten →