EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

MODELAREA CENTRALELOR FOTOVOLTAICE PENTRU INTEGRAREA ÎN SISTEMUL ENERGETIC UTILIZÂND SOFTWARE-UL PSCAD ȘI EVALUAREA CONFORMITĂȚII

MARIUS FILISANU, GABRIEL TĂNĂSESCU

ACTUALITĂŢI ŞI PERSPECTIVE ÎN DOMENIUL MAŞINILOR ELECTRICE (ELECTRIC MACHINES, MATERIALS AND DRIVES - PRESENT AND TRENDS) · 09.02.2026 · 21 (1) · 161-168

DOI: 10.36801/apme.2025.1.18 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACTUALITĂŢI ŞI PERSPECTIVE ÎN DOMENIUL MAŞINILOR ELECTRICE (ELECTRIC MACHINES, MATERIALS AND DRIVES - PRESENT AND TRENDS), online erschienen am 09.02.2026. Verfasst von MARIUS FILISANU und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper develops a complex model of a photovoltaic power plant with an installed capacity of 9.99 MW. The model is created in PSCAD-EMTDC, which allows adjustment of active and reactive power. Based on the power adjustment, the P-Q diagram is determined at the connection point. At the same time, the plant under study is integrated into the National Energy System, so the P-Q diagram will also be determined based on measurements. Finally, the proposed model will be validated using measurements, and the photovoltaic power plant's compliance with the technical requirements for interconnection will be verified. It should be noted that the power plant studied falls into category C. The conclusions highlight that the complex model enables valid validation of the photovoltaic power plant against all compliance requirements for category C power plants, which is essential for the actual assessment of grid integration.

Zitieren

APA

FILISANU, M., & TĂNĂSESCU, G. (2026). MODELAREA CENTRALELOR FOTOVOLTAICE PENTRU INTEGRAREA ÎN SISTEMUL ENERGETIC UTILIZÂND SOFTWARE-UL PSCAD ȘI EVALUAREA CONFORMITĂȚII. ACTUALITĂŢI ŞI PERSPECTIVE ÎN DOMENIUL MAŞINILOR ELECTRICE (ELECTRIC MACHINES, MATERIALS AND DRIVES - PRESENT AND TRENDS), 21(1), 161-168. https://doi.org/10.36801/apme.2025.1.18

Vancouver

FILISANU M, TĂNĂSESCU G. MODELAREA CENTRALELOR FOTOVOLTAICE PENTRU INTEGRAREA ÎN SISTEMUL ENERGETIC UTILIZÂND SOFTWARE-UL PSCAD ȘI EVALUAREA CONFORMITĂȚII. ACTUALITĂŢI ŞI PERSPECTIVE ÎN DOMENIUL MAŞINILOR ELECTRICE (ELECTRIC MACHINES, MATERIALS AND DRIVES - PRESENT AND TRENDS). 2026;21(1):161-168. doi:10.36801/apme.2025.1.18

BibTeX
@article{FILISANU2026,
  author = {FILISANU, MARIUS and TĂNĂSESCU, GABRIEL},
  title = {MODELAREA CENTRALELOR FOTOVOLTAICE PENTRU INTEGRAREA ÎN SISTEMUL ENERGETIC UTILIZÂND SOFTWARE-UL PSCAD ȘI EVALUAREA CONFORMITĂȚII},
  journal = {ACTUALITĂŢI ŞI PERSPECTIVE ÎN DOMENIUL MAŞINILOR ELECTRICE (ELECTRIC MACHINES, MATERIALS AND DRIVES - PRESENT AND TRENDS)},
  year = {2026},
  volume = {21},
  number = {1},
  pages = {161--168},
  doi = {10.36801/apme.2025.1.18}
}
Kostenlos starten →