Current Perspectives on 3D-printed Casts
Wiadomości Lekarskie · 30.03.2026 · (3) · 615-619
DOI: 10.36740/wlek/218282 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Wiadomości Lekarskie, online erschienen am 30.03.2026. Verfasst von Firoz Rizvi und 6 weiteren Autor:innen. Beteiligte Einrichtung: DEPARTMENT OF MEDICINE OF THE ELDERLY AND STROKE, AINTREE UNIVERSITY HOSPITAL, LIVERPOOL, UNITED KINGDOM. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Casts, Surgical, Radius Fractures.
Abstract (Originalsprache)
Aim
Fractures of the distal radius and ulna are among the most common skeletal injuries and are traditionally treated with cast immobilization. However, conventional casting techniques have significant limitations. In recent years, three-dimensional (3D) printing technology has emerged as a promising alternative in the production of personalized post-traumatic stabilization devices. The aim of this review was to present current information and perspectives on the development of 3D-printed casts, with particular emphasis on the diversity of designs, material properties, and clinical applications. Material and methods A literature review was conducted using the PubMed and Google Scholar databases. The results of the analyzed studies indicate that additive technologies enable the production of lightweight, ventilated, individually tailored orthoses with high mechanical strength and improved moisture resistance compared to traditional casts and glass fiber casts.
Conclusions
Materials such as polylactide (PLA) and PLA composites produced by Fused Filament Fabrication (FFF) demonstrate superior properties in static and dynamic tests. Furthermore, 3D-printed casts offer improved hygiene, greater comfort, a reduced risk of skin complications, such as wound healing, and high aesthetic acceptability. Clinical applications also include planning corrective osteotomies and the production of personalized surgical instruments. Although further research is needed on long-term durability and broad clinical outcomes, current reports indicate that 3D printing is a promising and increasingly viable alternative to traditional cast immobilization.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- DEPARTMENT OF MEDICINE OF THE ELDERLY AND STROKE, AINTREE UNIVERSITY HOSPITAL, LIVERPOOL, UNITED KINGDOM.
- FACULTY OF MEDICINE, MAZOVIAN ACADEMY IN PLOCK, PLOCK, POLAND.
- FACULTY OF MEDICINE, POZNAN UNIVERSITY OF MEDICAL SCIENCES, POZNAN, POLAND.
- INDEPENDENT PUBLIC HEALTH CARE INSTITUTION, MINISTRY OF THE INTERIOR AND ADMINISTRATION IN KIELCE NAMED AFTER ST. JOHN PAUL II IN KIELCE, KIELCE, POLAND.
- KIELCE HOSPITAL OF ST. ALEKSANDRA IN KIELCE, KIELCE, POLAND.
- REGIONAL HOSPITAL IN POZNAN, POZNAN, POLAND.
Zitieren
APA
Rizvi, F., Bełżek, K., Tracichleb, K., Pałubska, J., Műller, O., Bełżek, A., & Turżańska, K. (2026). Current Perspectives on 3D-printed Casts. Wiadomości Lekarskie, 615-619. https://doi.org/10.36740/wlek/218282
Vancouver
Rizvi F, Bełżek K, Tracichleb K, Pałubska J, Műller O, Bełżek A, et al. Current Perspectives on 3D-printed Casts. Wiadomości Lekarskie. 2026:615-619. doi:10.36740/wlek/218282
BibTeX
@article{Rizvi2026,
author = {Rizvi, Firoz and Bełżek, Konrad and Tracichleb, Kinga and Pałubska, Jagoda and Műller, Oliwer and Bełżek, Aleksandra and Turżańska, Karolina},
title = {Current Perspectives on 3D-printed Casts},
journal = {Wiadomości Lekarskie},
year = {2026},
number = {3},
pages = {615--619},
doi = {10.36740/wlek/218282}
}
EUVIMED