EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Analisis Total Productive Maintanance Dengan Menggunakan Metode OEE dan FMEA Pada Mesin Extruder GW – 350 Produksi Roll Sheet

Dodi Marcus Siagian, Deri Teguh Santoso

SPROCKET JOURNAL OF MECHANICAL ENGINEERING · 2022

DOI: 10.36655/sprocket.v4i1.692 ↗

Kurz gefasst

Fachartikel in der Zeitschrift SPROCKET JOURNAL OF MECHANICAL ENGINEERING, 2022. Verfasst von Dodi Marcus Siagian und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A company engaged in plastic specialists, with the basic ingredients of PolyEthylene Terephthalate, PolyPropylene, and Hight Impact Polystyrene. Products operated by Extruder machines. Total Productive Maintenance (TPM) with Overall Equipment Effectiveness (OEE) and Failure Mode and Effect Analysis (FMEA). Availability, Performance, Rate of Quality and OEE of Extruder GW-150. Based on the quantitative analysis of the OEE calculation, the OEE value of the Extruder 1 GW-350 machine is obtained with an average calculation of 79.35%. Based on the qualitative analysis using FMEA, the RPN failure mode score on the Extruder 1 GW-350 engine was obtained. The highest RPN value is the unstable (die) printer of 240.

Zitieren

APA

Siagian, D. M., & Santoso, D. T. (2022). Analisis Total Productive Maintanance Dengan Menggunakan Metode OEE dan FMEA Pada Mesin Extruder GW – 350 Produksi Roll Sheet. SPROCKET JOURNAL OF MECHANICAL ENGINEERING. https://doi.org/10.36655/sprocket.v4i1.692

Vancouver

Siagian DM, Santoso DT. Analisis Total Productive Maintanance Dengan Menggunakan Metode OEE dan FMEA Pada Mesin Extruder GW – 350 Produksi Roll Sheet. SPROCKET JOURNAL OF MECHANICAL ENGINEERING. 2022. doi:10.36655/sprocket.v4i1.692

BibTeX
@article{Siagian2022,
  author = {Siagian, Dodi Marcus and Santoso, Deri Teguh},
  title = {Analisis Total Productive Maintanance Dengan Menggunakan Metode OEE dan FMEA Pada Mesin Extruder GW – 350 Produksi Roll Sheet},
  journal = {SPROCKET JOURNAL OF MECHANICAL ENGINEERING},
  year = {2022},
  doi = {10.36655/sprocket.v4i1.692}
}
Kostenlos starten →