EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Thermo-Mechanical FEM Study of SMAW Parameter Effects in S355J2+N / ASTM A572 Gr.50 Dissimilar Steel Joints

Syed Farrukh Haider, Shaheryar A. Khan, Aqueel Shah, Muhammad Nasir Bashir, Asif Mansoor, Abbas Hussain, M. Mahmood Ali, Salman Nisar

Memoria Investigaciones en Ingeniería · 11.06.2026 · (30) · 30-55

DOI: 10.36561/ing.30.4 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Memoria Investigaciones en Ingeniería, online erschienen am 11.06.2026. Verfasst von Syed Farrukh Haider und 7 weiteren Autor:innen. Die Arbeit nennt 71 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Shielded Metal Arc Welding (SMAW) is widely employed in structural steel fabrication; however, the thermo-mechanical response of dissimilar structural steel joints remains insufficiently explored through numerical modeling. In this study, a three-dimensional transient thermo-mechanical finite element model is developed to investigate SMAW of dissimilar S355J2+N and ASTM A572 Grade 50 steel plates. Goldak’s double-ellipsoidal heat source is implemented to represent arc heat input, and a Box–Behnken design is employed to systematically examine the influence of welding current, voltage, and travel speed. The analysis focuses on peak temperature, out-of-plane distortion, and elastic stress indicators derived from a linear thermo-elastic formulation. The results indicate that welding current predominantly governs peak temperature, while travel speed has the strongest influence on thermal gradients and distortion behavior; voltage exhibits a secondary but non-negligible effect on heat distribution. Simulated thermal and deformation trends are benchmarked against published experimental and numerical studies on comparable structural steels and show consistent qualitative behavior. Owing to the absence of plasticity, temperature-dependent material properties, and direct experimental validation, stress results are interpreted solely as qualitative indicators rather than physically realistic residual stresses. The study provides a structured thermo-elastic FEM and design-of-experiments–based sensitivity framework for a dissimilar structural steel combination not previously reported in SMAW numerical studies, offering practical insight into parameter screening for thermal and distortion control in structural steel fabrication.

Zitieren

APA

Haider, S. F., Khan, S. A., Shah, A., Bashir, M. N., Mansoor, A., Hussain, A., Ali, M. M., & Nisar, S. (2026). Thermo-Mechanical FEM Study of SMAW Parameter Effects in S355J2+N / ASTM A572 Gr.50 Dissimilar Steel Joints. Memoria Investigaciones en Ingeniería, 30-55. https://doi.org/10.36561/ing.30.4

Vancouver

Haider SF, Khan SA, Shah A, Bashir MN, Mansoor A, Hussain A, et al. Thermo-Mechanical FEM Study of SMAW Parameter Effects in S355J2+N / ASTM A572 Gr.50 Dissimilar Steel Joints. Memoria Investigaciones en Ingeniería. 2026:30-55. doi:10.36561/ing.30.4

BibTeX
@article{Haider2026,
  author = {Haider, Syed Farrukh and Khan, Shaheryar A. and Shah, Aqueel and Bashir, Muhammad Nasir and Mansoor, Asif and Hussain, Abbas and Ali, M. Mahmood and Nisar, Salman},
  title = {Thermo-Mechanical FEM Study of SMAW Parameter Effects in S355J2+N / ASTM A572 Gr.50 Dissimilar Steel Joints},
  journal = {Memoria Investigaciones en Ingeniería},
  year = {2026},
  number = {30},
  pages = {30--55},
  doi = {10.36561/ing.30.4}
}
Kostenlos starten →