EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Formation and characterization of non-metallic inclusions in steel produced by melting secondary ferrous scrap in an electric arc furnace: A case study of AISI 1066 steel

Nozimjon Kholmirzaev, Nodir Turakhodjaev, Jamshidbek Khasanov, Chong Yang, Bekzod Yusupov, Shokhista Saidkhodjaeva, Abdujalol Bektemirov, Nargiza Sadikova, Zokirjon Nurdinov, Nuriddin Yusupov, Davronbek Juraboev, Bobomurod Nurmurodov

Acta Metallurgica Slovaca · 28.06.2026 · 32 (2) · 116-123

DOI: 10.36547/ams.32.2.2284 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Acta Metallurgica Slovaca, online erschienen am 28.06.2026. Verfasst von Nozimjon Kholmirzaev und 11 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigated the formation of non-metallic inclusions and their characterization during the melting of AISI1066 steel from secondary metal scrap in an electric arc furnace. The analyses were carried out using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS). In addition, a deep learning-based segmentation method was applied to improve the identification of inclusions. The results confirmed a heterogeneous microstructure consisting of non-metallic inclusions dispersed within a Fe-based matrix. The size of the inclusions ranged from a few micrometers up to approximately 40 µm. The majority of inclusions were found within the range of 10–25 µm. SEM analysis showed that the inclusions predominantly exhibit irregular and globular morphologies. EDS results confirmed that they consist of manganese sulfides (MnS), oxides (Al₂O₃ and SiO₂), and complex multi-phase particles. The elevated sulfur (S) (0.12 wt.%) and copper (Cu) (0.81 wt.%) contents in the investigated samples indicate that deoxidation and modification processes were not sufficiently effective. The deep learning-based model made it possible to accurately separate non-metallic inclusions in the alloy composition. According to the model results, inclusions larger than ≥30 µm mainly represent the fraction of oxide phases, while fine inclusions smaller than

Zitieren

APA

Kholmirzaev, N., Turakhodjaev, N., Khasanov, J., Yang, C., Yusupov, B., Saidkhodjaeva, S., Bektemirov, A., Sadikova, N., Nurdinov, Z., Yusupov, N., Juraboev, D., & Nurmurodov, B. (2026). Formation and characterization of non-metallic inclusions in steel produced by melting secondary ferrous scrap in an electric arc furnace: A case study of AISI 1066 steel. Acta Metallurgica Slovaca, 32(2), 116-123. https://doi.org/10.36547/ams.32.2.2284

Vancouver

Kholmirzaev N, Turakhodjaev N, Khasanov J, Yang C, Yusupov B, Saidkhodjaeva S, et al. Formation and characterization of non-metallic inclusions in steel produced by melting secondary ferrous scrap in an electric arc furnace: A case study of AISI 1066 steel. Acta Metallurgica Slovaca. 2026;32(2):116-123. doi:10.36547/ams.32.2.2284

BibTeX
@article{Kholmirzaev2026,
  author = {Kholmirzaev, Nozimjon and Turakhodjaev, Nodir and Khasanov, Jamshidbek and Yang, Chong and Yusupov, Bekzod and Saidkhodjaeva, Shokhista and Bektemirov, Abdujalol and Sadikova, Nargiza and Nurdinov, Zokirjon and Yusupov, Nuriddin and Juraboev, Davronbek and Nurmurodov, Bobomurod},
  title = {Formation and characterization of non-metallic inclusions in steel produced by melting secondary ferrous scrap in an electric arc furnace: A case study of AISI 1066 steel},
  journal = {Acta Metallurgica Slovaca},
  year = {2026},
  volume = {32},
  number = {2},
  pages = {116--123},
  doi = {10.36547/ams.32.2.2284}
}
Kostenlos starten →