Effect of thermal exposure on the compressive strength and microstructure of Al-6061 alloy
Acta Metallurgica Slovaca · 11.03.2025 · 31 (1) · 47-52
DOI: 10.36547/ams.31.1.2138 ↗Kurz gefasst
Fachartikel in der Zeitschrift Acta Metallurgica Slovaca, online erschienen am 11.03.2025. Verfasst von Ketan Verma und 3 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref).
Abstract (Originalsprache)
Al 6061 is a commercial-grade aluminium alloy highly utilized in aerospace, automotive, high-pressure gas cylinders, and many other construction purposes. Al 6061 is a heat-treatable grade. Heat treatment can enhance the alloy's mechanical and microstructural qualities by controlling grain size and precipitate distribution. Three heat treatment steps are followed for any non-ferrous alloy to achieve the desired mechanical properties. In this work, only two heat treatment steps have been followed- solution annealing followed by quenching in three different media, i.e., water, oil, and air. The heat-treated samples' compression, hardness and microstructural properties were assessed and compared with those of untreated samples. A significant drop in the yield stress was noticed in the solutionized+quenched samples due to dissolved secondary and ternary phases in the primary α matrix. However, the improved precipitation of the secondary (Mg2Si) phase has greatly increased the hardness of the quenched sample. Optical microscopic images have observed high fine ternary Al-Mg-Si and secondary Mg2Si precipitated.
Zitieren
APA
Verma, K., Singh, P., Khan, A., & Dewangan, S. (2025). Effect of thermal exposure on the compressive strength and microstructure of Al-6061 alloy. Acta Metallurgica Slovaca, 31(1), 47-52. https://doi.org/10.36547/ams.31.1.2138
Vancouver
Verma K, Singh P, Khan A, Dewangan S. Effect of thermal exposure on the compressive strength and microstructure of Al-6061 alloy. Acta Metallurgica Slovaca. 2025;31(1):47-52. doi:10.36547/ams.31.1.2138
BibTeX
@article{Verma2025,
author = {Verma, Ketan and Singh, Priyanshu and Khan, Ayan and Dewangan, Saurabh},
title = {Effect of thermal exposure on the compressive strength and microstructure of Al-6061 alloy},
journal = {Acta Metallurgica Slovaca},
year = {2025},
volume = {31},
number = {1},
pages = {47--52},
doi = {10.36547/ams.31.1.2138}
}
EUVIMED