Viscosity Test as an Initial Parameter for Handling B3 Liquid Waste in Fuel
Journal of Educational Engineering and Environment · 2023
DOI: 10.36526/jeee.v2i2.3307 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Educational Engineering and Environment, 2023. Verfasst von Restiani Sih Harsanti und 2 weiteren Autor:innen.
Abstract (Originalsprache)
Sludge oil is also defined as oil sludge that contains heavy metal compounds with characteristics that are difficult to clean with air. Therefore, oil sludge processing must follow the established B3 Waste Processing regulations. This research aims to provide information on viscosity tests as an initial parameter for B3 waste management methods. This research uses a distillation method using distilled water with a solvent volume ratio of 1:1 and 2:1 and a redwood viscosity test to obtain the viscosity value of the sample. The results of the research show that the effect of temperature on waste viscosity is negative exponential, while the effect of the distillation volume ratio on the viscosity of the sample volume compared to the solvent is that the viscosity value is greater.
Zitieren
APA
Harsanti, R. S., Susanti, R. E. E., & Yasi, R. M. (2023). Viscosity Test as an Initial Parameter for Handling B3 Liquid Waste in Fuel. Journal of Educational Engineering and Environment. https://doi.org/10.36526/jeee.v2i2.3307
Vancouver
Harsanti RS, Susanti REE, Yasi RM. Viscosity Test as an Initial Parameter for Handling B3 Liquid Waste in Fuel. Journal of Educational Engineering and Environment. 2023. doi:10.36526/jeee.v2i2.3307
BibTeX
@article{Harsanti2023,
author = {Harsanti, Restiani Sih and Susanti, Reny Eka Evi and Yasi, Ratna Mustika},
title = {Viscosity Test as an Initial Parameter for Handling B3 Liquid Waste in Fuel},
journal = {Journal of Educational Engineering and Environment},
year = {2023},
doi = {10.36526/jeee.v2i2.3307}
}
EUVIMED