EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Designing a steel connection with a high degree of disassembly: a practice-based experience

Francesco Incelli, Luciano Cardellicchio

TECHNE - Journal of Technology for Architecture and Environment · 29.07.2021 · 104-113

DOI: 10.36253/techne-10574 ↗

Kurz gefasst

Fachartikel in der Zeitschrift TECHNE - Journal of Technology for Architecture and Environment, online erschienen am 29.07.2021. Verfasst von Francesco Incelli und 1 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This article is derived from a feasibility study for a single-story elevation at the Kent School of Architecture and Planning (KSAP) in the United Kingdom. This project embraced two fundamental principles of the circular economy: flexibility of interior spaces and Design for Disassembly (DfD). The goals were to reduce the risk of demolition and preserve the value of the building material to empower its later use. These principles formed the solution for the structural frame. For this paper, the engineering phase was carried out to improve the structural connections designed according to DfD principles and following generative design methods.

Zitieren

APA

Incelli, F., & Cardellicchio, L. (2021). Designing a steel connection with a high degree of disassembly: a practice-based experience. TECHNE - Journal of Technology for Architecture and Environment, 104-113. https://doi.org/10.36253/techne-10574

Vancouver

Incelli F, Cardellicchio L. Designing a steel connection with a high degree of disassembly: a practice-based experience. TECHNE - Journal of Technology for Architecture and Environment. 2021:104-113. doi:10.36253/techne-10574

BibTeX
@article{Incelli2021,
  author = {Incelli, Francesco and Cardellicchio, Luciano},
  title = {Designing a steel connection with a high degree of disassembly: a practice-based experience},
  journal = {TECHNE - Journal of Technology for Architecture and Environment},
  year = {2021},
  pages = {104--113},
  doi = {10.36253/techne-10574}
}
Kostenlos starten →