EUVIMEDEUVIMED entdecken
Crossref

Analisis Rancangan Antena Telemetri Jenis Dipole pada Unmanned Aerial Vehicle (UAV)

Melvi Melvi, Chiko Ayunindya Shevia, Yetti Yuniati, Mona Arif Muda Batubara, Ardian Ulvan, Aryanto Aryanto

Jurnal Teknologi Riset Terapan · 2023

DOI: 10.35912/jatra.v1i2.2404 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Jurnal Teknologi Riset Terapan, 2023. Verfasst von Melvi Melvi und 5 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Purpose

This study focuses on the design and evaluation of dipole antennas for Unmanned Aerial Vehicles (UAVs) operating at a frequency of 433 MHz. The aim is to develop small and lightweight antennas that do not compromise the aerodynamic characteristics of UAVs, ensuring effective communication between the UAV and the Ground Control Station (GCS). Methodology: The research employed CST software to design and simulate dipole antennas using various materials, including copper, gold, silver, aluminum, and iron. The simulation parameters were analyzed in terms of Voltage Standing Wave Ratio (VSWR) values and return loss.

Results

The simulation results revealed that the silver antenna material exhibited the best performance, with a VSWR value of 1.3191 and a return loss of -17.222 dB. However, during the fabrication stage, copper was chosen for the antennas, which yielded a VSWR measurement result of 1.427 and a return loss value of -15.09 dB. Subsequent testing of the dipole antenna's communication distance, when placed on a UAV, resulted in a Received Signal Strength Indicator (RSSI) value of -70.68 dBm. This indicated that the antenna maintained a signal quality of 96% at a distance of 2.5 km. Limitation: One limitation of this study is that it primarily focuses on simulations and testing at a specific frequency (433 MHz) and material selection (copper for fabrication). The results may not be directly applicable to different frequencies or materials used in UAV antennas. Additionally, real-world conditions, such as environmental interference, could affect the performance of the antennas. Contribution:This research contributes to the development of efficient and lightweight dipole antennas for UAVs, ensuring reliable communication with GCS. The findings, particularly the choice of copper for fabrication, provide valuable insights for improving UAV communication systems without compromising flight performance.

Zitieren

APA

Melvi, M., Shevia, C. A., Yuniati, Y., Batubara, M. A. M., Ulvan, A., & Aryanto, A. (2023). Analisis Rancangan Antena Telemetri Jenis Dipole pada Unmanned Aerial Vehicle (UAV). Jurnal Teknologi Riset Terapan. https://doi.org/10.35912/jatra.v1i2.2404

Vancouver

Melvi M, Shevia CA, Yuniati Y, Batubara MAM, Ulvan A, Aryanto A. Analisis Rancangan Antena Telemetri Jenis Dipole pada Unmanned Aerial Vehicle (UAV). Jurnal Teknologi Riset Terapan. 2023. doi:10.35912/jatra.v1i2.2404

BibTeX
@article{Melvi2023,
  author = {Melvi, Melvi and Shevia, Chiko Ayunindya and Yuniati, Yetti and Batubara, Mona Arif Muda and Ulvan, Ardian and Aryanto, Aryanto},
  title = {Analisis Rancangan Antena Telemetri Jenis Dipole pada Unmanned Aerial Vehicle (UAV)},
  journal = {Jurnal Teknologi Riset Terapan},
  year = {2023},
  doi = {10.35912/jatra.v1i2.2404}
}
Kostenlos starten →