EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Surface waviness of weld bead (layer) of GTAW based wire arc additive manufacturing process

Agus Sentana, Syahbardia, Mabel Agung Nugroho, Ario Sunar Baskoro

Teknobiz : Jurnal Ilmiah Program Studi Magister Teknik Mesin · 04.03.2026 · 16 (1) · 77-81

DOI: 10.35814/pjxva503 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Teknobiz : Jurnal Ilmiah Program Studi Magister Teknik Mesin, online erschienen am 04.03.2026. Verfasst von Agus Sentana und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additive manufacturing has become a focus of industry and research due to the many new developments in processes and systems. This is further strengthened by the trend of resource efficiency, as manufacturing processes towards additive manufacturing offer the possibility of producing close to the required size shape. Additive manufactured products can experience surface imperfections assessed in this study, namely the morphology profile or surface curvature (surface waviness) of the weld bead layer. Generally, surface curvature can be referred to as a "hump" caused by the welding process. To achieve the target of achieving products with relatively minimal surface waviness, experiments and analysis of the manufacturing process using GTAW additive welding on AA 6061 substrate material with ER 5356 filler were conducted. The experiments were carried out by first determining the process parameters and factors that affect the quality of the weld bead layer. The layers stacked in layers were measured for their width and height geometry, surface waviness tests were conducted, and analysis was carried out. The deposition rate or filler deposit, travel speed, and filler feed speed determine the level of surface waviness. In this study, high surface curvature occurred at a wire feeder speed (WFS) of 25 mm/s with a travel speed (TS) of 80 mm/min.

Zitieren

APA

Sentana, A., Syahbardia, Nugroho, M. A., & Baskoro, A. S. (2026). Surface waviness of weld bead (layer) of GTAW based wire arc additive manufacturing process. Teknobiz : Jurnal Ilmiah Program Studi Magister Teknik Mesin, 16(1), 77-81. https://doi.org/10.35814/pjxva503

Vancouver

Sentana A, Syahbardia, Nugroho MA, Baskoro AS. Surface waviness of weld bead (layer) of GTAW based wire arc additive manufacturing process. Teknobiz : Jurnal Ilmiah Program Studi Magister Teknik Mesin. 2026;16(1):77-81. doi:10.35814/pjxva503

BibTeX
@article{Sentana2026,
  author = {Sentana, Agus and Syahbardia and Nugroho, Mabel Agung and Baskoro, Ario Sunar},
  title = {Surface waviness of weld bead (layer) of GTAW based wire arc additive manufacturing process},
  journal = {Teknobiz : Jurnal Ilmiah Program Studi Magister Teknik Mesin},
  year = {2026},
  volume = {16},
  number = {1},
  pages = {77--81},
  doi = {10.35814/pjxva503}
}
Kostenlos starten →