EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

TRANSMISSION SYSTEM PROTOTYPE AS SPEED OPTIMIZATION IN THE POWER DRIVE MECHANISM OF THE MAKER S4000 MACHINE AT PT DM

Christian Yokevin Mahernanda Putanto, Aditya Nugraha, Yohanes Nugroho, Bagus Karyadi

Teknobiz : Jurnal Ilmiah Program Studi Magister Teknik Mesin · 2025

DOI: 10.35814/gws9wp29 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Teknobiz : Jurnal Ilmiah Program Studi Magister Teknik Mesin, 2025. Verfasst von Christian Yokevin Mahernanda Putanto und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The S4000 maker machine at PT DM faces issues during the cigarette rod cutting process due to a mismatch in speed between the servo motors in the feeding and cutting processes. This lack of synchronization results in imprecise cuts and an increase in defective products. This problem indicates the need for a system capable of mechanically synchronizing the rotational speeds between the two processes. This study aims to design a gear transmission system as a solution to synchronize the speeds between the feeding and cutting processes. Problem analysis was conducted using the Failure Mode and Effect Analysis (FMEA) method. The design process follows the VDI 2221 method, which includes functional requirement analysis, development of several conceptual alternatives, evaluation of transmission ratios, and selection of suitable mechanical components. Structural strength analysis was carried out through simulations using Finite Element Analysis (FEA). A system prototype was created using 3D printing as a design verification tool. The results show that the transmission system is capable of delivering synchronized rotation, resulting in consistent cigarette rod lengths. The FEA simulation indicates the system is safe under working loads. The prototype was successfully validated both visually and functionally, serving as a basis for evaluation prior to actual implementation

Zitieren

APA

Putanto, C. Y. M., Nugraha, A., Nugroho, Y., & Karyadi, B. (2025). TRANSMISSION SYSTEM PROTOTYPE AS SPEED OPTIMIZATION IN THE POWER DRIVE MECHANISM OF THE MAKER S4000 MACHINE AT PT DM. Teknobiz : Jurnal Ilmiah Program Studi Magister Teknik Mesin. https://doi.org/10.35814/gws9wp29

Vancouver

Putanto CYM, Nugraha A, Nugroho Y, Karyadi B. TRANSMISSION SYSTEM PROTOTYPE AS SPEED OPTIMIZATION IN THE POWER DRIVE MECHANISM OF THE MAKER S4000 MACHINE AT PT DM. Teknobiz : Jurnal Ilmiah Program Studi Magister Teknik Mesin. 2025. doi:10.35814/gws9wp29

BibTeX
@article{Putanto2025,
  author = {Putanto, Christian Yokevin Mahernanda and Nugraha, Aditya and Nugroho, Yohanes and Karyadi, Bagus},
  title = {TRANSMISSION SYSTEM PROTOTYPE AS SPEED OPTIMIZATION IN THE POWER DRIVE MECHANISM OF THE MAKER S4000 MACHINE AT PT DM},
  journal = {Teknobiz : Jurnal Ilmiah Program Studi Magister Teknik Mesin},
  year = {2025},
  doi = {10.35814/gws9wp29}
}
Kostenlos starten →