EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

DESIGN OF 500 KG CAPACITY MATERIAL HANDLING TO SUPPORT THE ASSEMBLY PROCESS AT PT. XYZ USING THE VDI 2221 METHOD

Fredericus Prijo Santoso, Aditya Nugraha, Hermawan Budi Prasetyo, Didan Bima Prakosa

Teknobiz : Jurnal Ilmiah Program Studi Magister Teknik Mesin · 03.07.2026 · 16 (2) · 125-131

DOI: 10.35814/bej1r746 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Teknobiz : Jurnal Ilmiah Program Studi Magister Teknik Mesin, online erschienen am 03.07.2026. Verfasst von Fredericus Prijo Santoso und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The design of Material Handling with a Capacity of 500 Kgs to Support the Assembly Process at the Tilting Table of PT XYZ Using the VDI 2221 Method is a development of material handling that was previously used at PT XYZ. This design aims to maximize the material handling mechanism to make it easier for operators during the Towing assembly process on the Tilting Table. Where previously moving the motor compartment, platform, and steering to the total assembly line was still manual using human labor. Therefore, this design maximizes the workings of the material handling by modifying the IWF frame (girder) to be able to move the motor compartment, platform, and steering to the total assembly line easily. The research method used for the Design of Material Handling with a Capacity of 500 Kg to Support the Assembly Process at the Tilting Table of PT Senzo Feinmetal is the VDI (Verein Deutsche Inginieur) 2221 method. The sequence of work to design a design using the VDI 2221 method in general is planning, conceptualizing, designing, and completing. The results of the calculation and analysis in this design are a comparison of the previous design whether the construction structure is in accordance with applicable strength standards. The calculations and analysis that have been carried out by considering the appropriate standards are intended to be able to withstand a maximum load of 500 Kgs.

Zitieren

APA

Santoso, F. P., Nugraha, A., Prasetyo, H. B., & Prakosa, D. B. (2026). DESIGN OF 500 KG CAPACITY MATERIAL HANDLING TO SUPPORT THE ASSEMBLY PROCESS AT PT. XYZ USING THE VDI 2221 METHOD. Teknobiz : Jurnal Ilmiah Program Studi Magister Teknik Mesin, 16(2), 125-131. https://doi.org/10.35814/bej1r746

Vancouver

Santoso FP, Nugraha A, Prasetyo HB, Prakosa DB. DESIGN OF 500 KG CAPACITY MATERIAL HANDLING TO SUPPORT THE ASSEMBLY PROCESS AT PT. XYZ USING THE VDI 2221 METHOD. Teknobiz : Jurnal Ilmiah Program Studi Magister Teknik Mesin. 2026;16(2):125-131. doi:10.35814/bej1r746

BibTeX
@article{Santoso2026,
  author = {Santoso, Fredericus Prijo and Nugraha, Aditya and Prasetyo, Hermawan Budi and Prakosa, Didan Bima},
  title = {DESIGN OF 500 KG CAPACITY MATERIAL HANDLING TO SUPPORT THE ASSEMBLY PROCESS AT PT. XYZ USING THE VDI 2221 METHOD},
  journal = {Teknobiz : Jurnal Ilmiah Program Studi Magister Teknik Mesin},
  year = {2026},
  volume = {16},
  number = {2},
  pages = {125--131},
  doi = {10.35814/bej1r746}
}
Kostenlos starten →