Thermal and Energy Performance of a Modular-Airflow Air Fryer for Dehydration And Thawing
Jurnal Agroekoteknologi Terapan · 30.09.2026 · 7 (3) · 902-912
DOI: 10.35791/jat.v7i3.70521 ↗Kurz gefasst
Fachartikel in der Zeitschrift Jurnal Agroekoteknologi Terapan, online erschienen am 30.09.2026. Verfasst von Jolanda Ch. E. Lamaega und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Abstract (Originalsprache)
Affordable postharvest processing equipment requires careful management of heat and airflow, particularly when electrical capacity is limited. This study assessed the thermal and energy performance of a compact modular-airflow food-processing chamber and examined its application to fruit dehydration and frozen-meat thawing. A 15.6 L insulated chamber used incandescent heaters rated at 60, 100, and 150 W and interchangeable recirculation, exhaust, and ambient-air intake modules. The no-load thermal experiment followed a 3 × 2 × 2 factorial arrangement of heating power, airflow mode (recirculation or exhaust), and one or two active fan modules, with three replicates per condition. Temperature, stabilization time, and 15-min electrical consumption were evaluated; fruit dehydration and meat thawing were reported descriptively. Recirculation maintained higher chamber temperatures than exhaust operation. Using two recirculation modules reduced the reported apparent vertical temperature difference by approximately 53–62% compared with one module. Electrical use during the no-load tests ranged from 15.53 to 38.57 Wh. In the fruit trials, the 150 W two-module exhaust treatment produced the highest recorded gravimetric mass losses, 69.0% for citrus and 67.6% for strawberry, with specific energy consumption of 2.29 and 2.34 Wh per gram of removed mass, respectively. Two-module ambient-air intake shortened the observed thawing endpoint at 60 and 100 W. These findings indicate that interchangeable airflow arrangements can support distinct thermal-processing tasks within one small chamber, although further product-quality and airflow measurements are needed before broader performance claims can be made.
Zitieren
APA
Lamaega, J. C. E., Ogie, T. B., Paat, F. J., & Sintaro, S. (2026). Thermal and Energy Performance of a Modular-Airflow Air Fryer for Dehydration And Thawing. Jurnal Agroekoteknologi Terapan, 7(3), 902-912. https://doi.org/10.35791/jat.v7i3.70521
Vancouver
Lamaega JCE, Ogie TB, Paat FJ, Sintaro S. Thermal and Energy Performance of a Modular-Airflow Air Fryer for Dehydration And Thawing. Jurnal Agroekoteknologi Terapan. 2026;7(3):902-912. doi:10.35791/jat.v7i3.70521
BibTeX
@article{Lamaega2026,
author = {Lamaega, Jolanda Ch. E. and Ogie, Tommy B. and Paat, Frangky J. and Sintaro, Sanriomi},
title = {Thermal and Energy Performance of a Modular-Airflow Air Fryer for Dehydration And Thawing},
journal = {Jurnal Agroekoteknologi Terapan},
year = {2026},
volume = {7},
number = {3},
pages = {902--912},
doi = {10.35791/jat.v7i3.70521}
}
EUVIMED