EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

Effects of Pretreatment and Frying Temperature on Oil Content, Acrylamide Formation, Color, Texture, and Sensory Acceptance of Kerupuk Sanjai Cassava Chips from Bukittinggi, West Sumatra

Lalu Muhammad, Ni Luh Putu Handayani, Ahmad Rian Hidayat

Journal Global of Food Technology · 30.09.2026 · 1 (2) · 136-143

DOI: 10.35730/5n0qa205 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal Global of Food Technology, online erschienen am 30.09.2026. Verfasst von Lalu Muhammad und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Kerupuk sanjai is a thin cassava (Manihot esculenta Crantz) chip that is a traditional culinary specialty of Bukittinggi, West Sumatra, produced by deep-frying uniformly sliced cassava in palm oil at high temperatures. As a high-carbohydrate starch-based fried product, kerupuk sanjai is susceptible to two principal quality and safety concerns: excessive oil uptake and the formation of acrylamide a probable human carcinogen (IARC Group 2A) generated via the Maillard reaction between asparagine and reducing sugars above 120°C. This study systematically evaluated the effects of four pretreatment strategies control (no pretreatment), blanching (85°C, 2 min), soaking in 3% NaCl solution (40°C, 20 min), and pre-drying (60°C oven, 45 min) combined with two frying temperatures (150°C and 170°C) on oil content, color (L* and a*), acrylamide concentration, textural hardness, and sensory acceptability of kerupuk sanjai. A 4 × 2 factorial Completely Randomized Design with three replicates was employed. Results demonstrated that both pretreatment and frying temperature significantly affected all measured parameters (p < 0.001), with significant interactions for acrylamide (p < 0.05). Pre-drying yielded the lowest oil content (22.3 ± 0.5% at 170°C), while blanching produced the lowest acrylamide concentration (180 ± 12 µg/kg at 150°C) and best colorimetric attributes. Increasing frying temperature from 150°C to 170°C increased acrylamide by approximately 3.0–3.5-fold across all pretreatments. The a* colorimetric parameter (redness) exhibited a strong positive Pearson correlation with acrylamide content (r = 0.97, p < 0.001), validating it as a non-destructive process control indicator applicable at the artisan production level. Blanching combined with 150°C frying is recommended as the safest processing combination, while pre-drying combined with 170°C provides the optimal balance between oil reduction and consumer acceptability (overall sensory score 4.1/5.0).

Zitieren

APA

Muhammad, L., Handayani, N. L. P., & Hidayat, A. R. (2026). Effects of Pretreatment and Frying Temperature on Oil Content, Acrylamide Formation, Color, Texture, and Sensory Acceptance of Kerupuk Sanjai Cassava Chips from Bukittinggi, West Sumatra. Journal Global of Food Technology, 1(2), 136-143. https://doi.org/10.35730/5n0qa205

Vancouver

Muhammad L, Handayani NLP, Hidayat AR. Effects of Pretreatment and Frying Temperature on Oil Content, Acrylamide Formation, Color, Texture, and Sensory Acceptance of Kerupuk Sanjai Cassava Chips from Bukittinggi, West Sumatra. Journal Global of Food Technology. 2026;1(2):136-143. doi:10.35730/5n0qa205

BibTeX
@article{Muhammad2026,
  author = {Muhammad, Lalu and Handayani, Ni Luh Putu and Hidayat, Ahmad Rian},
  title = {Effects of Pretreatment and Frying Temperature on Oil Content, Acrylamide Formation, Color, Texture, and Sensory Acceptance of Kerupuk Sanjai Cassava Chips from Bukittinggi, West Sumatra},
  journal = {Journal Global of Food Technology},
  year = {2026},
  volume = {1},
  number = {2},
  pages = {136--143},
  doi = {10.35730/5n0qa205}
}
Kostenlos starten →