EUVIMEDEUVIMED entdecken
Crossref

RESEARCH ON CONTACT PARAMETERS CALIBRATION OF SOYBEAN SEEDS BASED ON DISCRETE ELEMENT SIMULATION

Yuejiang TENG, Chengqian JIN, Fuxiang XIE, Jian SONG, Yanjun LI

INMATEH - Agricultural Engineering · 30.04.2026 · 1226

DOI: 10.35633/inmateh-78-96 ↗

Kurz gefasst

Fachartikel in der Zeitschrift INMATEH - Agricultural Engineering, online erschienen am 30.04.2026. Verfasst von Yuejiang TENG und 4 weiteren Autor:innen. Die Arbeit nennt 20 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To promote the application of the discrete element method (DEM) in the research and development of soybean production equipment, reduce development costs, and improve testing efficiency, the contact parameters of soybean seeds in a discrete element environment were calibrated. A discrete element model of soybean seeds was established in EDEM software using a multi-sphere aggregation approach. The coefficient of restitution between soybean seeds and a Q235 steel plate was calibrated to 0.54 using a collision rebound test. The static friction coefficient between soybean seeds and the Q235 steel plate was calibrated to 0.34 through an inclined-plane sliding test, whereas the rolling friction coefficient was calibrated to 0.01 using an inclined-plane rolling test. The angle of repose of soybean seeds was determined to be 31 ° using the steel-box extraction method. Based on a quadratic regression orthogonal rotational combination design, a regression model describing the relationship between the soybean angle of repose and inter-particle contact parameters was established. The model was optimized through analysis of variance, and the optimal combination of inter-particle contact parameters was determined as follows: coefficient of restitution between seeds of 0.65, static friction coefficient between seeds of 0.55, and rolling friction coefficient between seeds of 0.04. Under these parameter conditions, the relative error of the angle of repose between the simulation and bench tests was 0.32%, demonstrating the accuracy of the calibrated contact parameters and the feasibility of the simulation method. The obtained results can provide a reference for selecting soybean seed contact parameters in discrete element simulations.

Zitieren

APA

TENG, Y., JIN, C., XIE, F., SONG, J., & LI, Y. (2026). RESEARCH ON CONTACT PARAMETERS CALIBRATION OF SOYBEAN SEEDS BASED ON DISCRETE ELEMENT SIMULATION. INMATEH - Agricultural Engineering, 1226. https://doi.org/10.35633/inmateh-78-96

Vancouver

TENG Y, JIN C, XIE F, SONG J, LI Y. RESEARCH ON CONTACT PARAMETERS CALIBRATION OF SOYBEAN SEEDS BASED ON DISCRETE ELEMENT SIMULATION. INMATEH - Agricultural Engineering. 2026:1226. doi:10.35633/inmateh-78-96

BibTeX
@article{TENG2026,
  author = {TENG, Yuejiang and JIN, Chengqian and XIE, Fuxiang and SONG, Jian and LI, Yanjun},
  title = {RESEARCH ON CONTACT PARAMETERS CALIBRATION OF SOYBEAN SEEDS BASED ON DISCRETE ELEMENT SIMULATION},
  journal = {INMATEH - Agricultural Engineering},
  year = {2026},
  pages = {1226},
  doi = {10.35633/inmateh-78-96}
}
Kostenlos starten →