EUVIMEDEUVIMED entdecken
Crossref

PHENOTYPIC CHARACTER EXTRACTION OF TOMATO PLANT BASED ON 3D POINT CLOUD DATA

Yang RAN, Shilong GE, Mingyuan YAO, Yuxi LI, Ruicheng QIU, Chen WANG, Li LI

INMATEH - Agricultural Engineering · 30.04.2026 · 622

DOI: 10.35633/inmateh-78-50 ↗

Kurz gefasst

Fachartikel in der Zeitschrift INMATEH - Agricultural Engineering, online erschienen am 30.04.2026. Verfasst von Yang RAN und 6 weiteren Autor:innen. Die Arbeit nennt 20 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To address the issue of 3D reconstruction information loss caused by occlusion during single-view camera acquisition of crop phenotypic parameters, this study proposes a detection method for tomato plant phenotypic parameters based on multi-view 3D point cloud reconstruction. The Kinect 2.0 sensor was employed to acquire point cloud data of tomato plants from three different viewpoints. Background noise was effectively removed using a combination of Conditional Filtering and Statistical Outlier Removal methods. By extracting surface normal features and calculating Fast Point Feature Histograms (FPFH), the Sample Consensus Initial Alignment (SAC-IA) and Iterative Closest Point (ICP) algorithms were utilized to accomplish coarse and accurate registration of the point clouds, respectively, ultimately achieving 3D reconstruction. Experimental results demonstrated that the reconstructed 3D model of the tomato plant was clear in outline and complete in structure. For the phenotypic parameters of plant height, canopy width, and leaf angle, the coefficients of determination (R²) between the calculated and manually measured values were 0.98, 0.94, and 0.89, respectively, with Root Mean Square Errors (RMSE) of 0.75 cm, 1.10 cm, and 4.43 °. Compared to single-view measurements, the accuracy of plant height and maximum canopy width derived from multi-view reconstruction increased by 15.31% and 13.12%, respectively. This method provides technical support for the rapid and accurate extraction of phenotypic parameters in tomato plants.

Zitieren

APA

RAN, Y., GE, S., YAO, M., LI, Y., QIU, R., WANG, C., & LI, L. (2026). PHENOTYPIC CHARACTER EXTRACTION OF TOMATO PLANT BASED ON 3D POINT CLOUD DATA. INMATEH - Agricultural Engineering, 622. https://doi.org/10.35633/inmateh-78-50

Vancouver

RAN Y, GE S, YAO M, LI Y, QIU R, WANG C, et al. PHENOTYPIC CHARACTER EXTRACTION OF TOMATO PLANT BASED ON 3D POINT CLOUD DATA. INMATEH - Agricultural Engineering. 2026:622. doi:10.35633/inmateh-78-50

BibTeX
@article{RAN2026,
  author = {RAN, Yang and GE, Shilong and YAO, Mingyuan and LI, Yuxi and QIU, Ruicheng and WANG, Chen and LI, Li},
  title = {PHENOTYPIC CHARACTER EXTRACTION OF TOMATO PLANT BASED ON 3D POINT CLOUD DATA},
  journal = {INMATEH - Agricultural Engineering},
  year = {2026},
  pages = {622},
  doi = {10.35633/inmateh-78-50}
}
Kostenlos starten →