EUVIMEDEUVIMED entdecken
Crossref

DESIGN AND EXPERIMENT OF COMBINED AXIAL-FLOW CORN PLOT THRESHING DEVICE

Long-yuan ZHANG, Xiao-wei GE, Jun-nan LI, Chen WANG, Xiang-kun LI, Guo-liang LI

INMATEH - Agricultural Engineering · 30.04.2026 · 108

DOI: 10.35633/inmateh-78-08 ↗

Kurz gefasst

Fachartikel in der Zeitschrift INMATEH - Agricultural Engineering, online erschienen am 30.04.2026. Verfasst von Long-yuan ZHANG und 5 weiteren Autor:innen. Die Arbeit nennt 20 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In order to address the challenges associated with wide moisture content variation in corn ears, significant operational fluctuations, and stringent kernel damage control requirements during threshing in experimental plots, a combined rod-tooth and spike-tooth axial-flow corn threshing device was designed. Based on the movement and force characteristics of the cobs during the axial-flow threshing process, the key component parameters of the machine such as the threshing drum, concave screen and flow guide structure were calculated and designed, and the three-dimensional model of the whole machine was built. Taking the discrete element method, the movement behavior of ears in the threshing drum was simulated and analyzed, and the influence of the combined threshing components on the axial transport characteristics of ears was focused on. At the same time, modal analysis of threshing drum was conducted by finite element method, and structural dynamic safety in operation speed range was verified. A multi-factor experiment was carried out on combined axial-flow corn threshing test bench, taking drum speed, feed rate and threshing gap as experimental factors and kernel breakage rate and unthreshed kernel rate as evaluation indexes. In this study, Design-Expert software was used to analyze the experimental results and optimize the parameters. Multi-objective optimization identified an optimal parameter combination with a drum speed of approximately 339 r/min, a feed rate of about 3.6 kg/s, and a threshing gap of around 45 mm. Field validation results showed good agreement with the model predictions, indicating that the combined axial-flow threshing device meets the operational requirements of small plots and exhibits good adaptability and operational stability.

Zitieren

APA

ZHANG, L., GE, X., LI, J., WANG, C., LI, X., & LI, G. (2026). DESIGN AND EXPERIMENT OF COMBINED AXIAL-FLOW CORN PLOT THRESHING DEVICE. INMATEH - Agricultural Engineering, 108. https://doi.org/10.35633/inmateh-78-08

Vancouver

ZHANG L, GE X, LI J, WANG C, LI X, LI G. DESIGN AND EXPERIMENT OF COMBINED AXIAL-FLOW CORN PLOT THRESHING DEVICE. INMATEH - Agricultural Engineering. 2026:108. doi:10.35633/inmateh-78-08

BibTeX
@article{ZHANG2026,
  author = {ZHANG, Long-yuan and GE, Xiao-wei and LI, Jun-nan and WANG, Chen and LI, Xiang-kun and LI, Guo-liang},
  title = {DESIGN AND EXPERIMENT OF COMBINED AXIAL-FLOW CORN PLOT THRESHING DEVICE},
  journal = {INMATEH - Agricultural Engineering},
  year = {2026},
  pages = {108},
  doi = {10.35633/inmateh-78-08}
}
Kostenlos starten →