PARAMETER CALIBRATION FOR THE DISCRETE ELEMENT SIMULATION OF TIRE-SOIL INTERACTION
INMATEH Agricultural Engineering · 30.04.2023 · 693-702
DOI: 10.35633/inmateh-69-67 ↗Kurz gefasst
Fachartikel in der Zeitschrift INMATEH Agricultural Engineering, online erschienen am 30.04.2023. Verfasst von Yajun ZHAO und 5 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 15 Literaturangaben.
Abstract (Originalsprache)
To carry out simulation research on tire-soil interaction, EDEM software was used to calibrate the test soil and the contact parameters between the tire and soil. The soil contact model was the Edinburgh Elasto-Plastic Adhesion (EEPA) model. Using the soil repose angle as the repose value, the contact plasticity ratio, the soil-soil rolling friction coefficient, and the tensile exponential (Tensile exp) were respectively calculated using the Plackett-Burman test, the steepest climbing test, and the Box-Behnken test, and the optimal combination of parameters was found to be E = 0.08, B = 0.1, and F = 4.8. The values of the remaining parameters were as follows: a soil-soil static friction coefficient of 0.45, a restitution coefficient of 0.5, a surface energy of 4, and a tangential stiffness multiplier of 0.35. Based on the slope sliding method, the coefficient of static friction between soil and rubber was calculated as 0.88. On this basis, a central combination test was designed to calibrate the rubber-soil rolling friction coefficient and coefficient of restitution, the optimal combination of which was found to be H = 0.18 and I = 0.55. A soil tank model was created using the optimal parameters, and the correctness of the established soil discrete element model and rubber-soil contact parameters was validated by comparing the simulation results and the results of an experiment of the tire driving process.
Zitieren
APA
ZHAO, Y., HOU, Y., LI, X., ZHU, H., CEN, S., & JIN, H. (2023). PARAMETER CALIBRATION FOR THE DISCRETE ELEMENT SIMULATION OF TIRE-SOIL INTERACTION. INMATEH Agricultural Engineering, 693-702. https://doi.org/10.35633/inmateh-69-67
Vancouver
ZHAO Y, HOU Y, LI X, ZHU H, CEN S, JIN H. PARAMETER CALIBRATION FOR THE DISCRETE ELEMENT SIMULATION OF TIRE-SOIL INTERACTION. INMATEH Agricultural Engineering. 2023:693-702. doi:10.35633/inmateh-69-67
BibTeX
@article{ZHAO2023,
author = {ZHAO, Yajun and HOU, Yifan and LI, Xiao and ZHU, Haijun and CEN, Siyuan and JIN, Hongling},
title = {PARAMETER CALIBRATION FOR THE DISCRETE ELEMENT SIMULATION OF TIRE-SOIL INTERACTION},
journal = {INMATEH Agricultural Engineering},
year = {2023},
pages = {693--702},
doi = {10.35633/inmateh-69-67}
}
EUVIMED