EUVIMEDEUVIMED entdecken
Crossref

Influence of wet thermal treatment on the performance of three-dimensional weft-knitted fabrics intended for personal protective equipment applications

CRISTINA GROSU, MIRELA BLAGA, RODICA HARPA, DANIELA FARIMA, MIHAI PENCIUC, ANA RAMONA CIOBANU, MIHAELA PERDEVARA

Industria Textila · 30.06.2026 · 453

DOI: 10.35530/it.077.03.2025154 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Industria Textila, online erschienen am 30.06.2026. Verfasst von CRISTINA GROSU und 6 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study evaluates the influence of wet thermal treatments (washing and steaming) on the structural, comfort, and functional properties of a set of twelve three-dimensional weft-knitted fabrics, all based on a sandwich configuration with identical cotton outer layers and a polyester monofilament binding yarn. The experimental design considered three machine set-up stitch cam divisions NP (13, 12, 11) corresponding to loose, medium and highly compact fabric structures and four binding ratios of the monofilament yarn (1:1; 1:3; 1:7; 1:15). Mass, thickness, and stitch density were measured before and after the wet thermal treatment, while air and water-vapour permeability, bursting strength, abrasion resistance, and dimensional behaviour were determined on the finished fabrics, according to relevant standards. Results showed that mass and stitch density increased, while thickness generally decreased after wet thermal stabilisation. For the finished fabrics, abrasion resistance and bursting strength increased with the monofilament binding ratio, reaching up to 15,000 cycles and 590 kPa, respectively, while air permeability showed an inverse trend, decreasing to approximately 1,000 L/m2/s for the most compact variants. These findings highlight the role of the binding ratio and stitch cam division of the knitting machine in defining the trade-off between comfort and protective performance. Overall, the investigated fabrics exhibit a balanced structural and functional behaviour, indicating their suitability as constituent layers for Category II PPE, such as gloves, workwear, jackets and vests, where mechanical durability and breathability are required.

Zitieren

APA

GROSU, C., BLAGA, M., HARPA, R., FARIMA, D., PENCIUC, M., CIOBANU, A. R., & PERDEVARA, M. (2026). Influence of wet thermal treatment on the performance of three-dimensional weft-knitted fabrics intended for personal protective equipment applications. Industria Textila, 453. https://doi.org/10.35530/it.077.03.2025154

Vancouver

GROSU C, BLAGA M, HARPA R, FARIMA D, PENCIUC M, CIOBANU AR, et al. Influence of wet thermal treatment on the performance of three-dimensional weft-knitted fabrics intended for personal protective equipment applications. Industria Textila. 2026:453. doi:10.35530/it.077.03.2025154

BibTeX
@article{GROSU2026,
  author = {GROSU, CRISTINA and BLAGA, MIRELA and HARPA, RODICA and FARIMA, DANIELA and PENCIUC, MIHAI and CIOBANU, ANA RAMONA and PERDEVARA, MIHAELA},
  title = {Influence of wet thermal treatment on the performance of three-dimensional weft-knitted fabrics intended for personal protective equipment applications},
  journal = {Industria Textila},
  year = {2026},
  pages = {453},
  doi = {10.35530/it.077.03.2025154}
}
Kostenlos starten →