EVALUATION OF STRESS INTENSITY FACTORS FOR CRACKS ON THE OUTSIDE OF THE YANKEE PAPER DRYER USING A 2D AXISYMMETRIC FEM MODEL
Annals of ”Dunarea de Jos” University of Galati, Fascicle V, Technologies in machine building · 2024
DOI: 10.35219/tmb.2019.1.02 ↗Kurz gefasst
Fachartikel in der Zeitschrift Annals of ”Dunarea de Jos” University of Galati, Fascicle V, Technologies in machine building, 2024. Verfasst von Doina Boazu und 1 weiteren Autor:innen.
Abstract (Originalsprache)
In this paper the stress concentration factors are evaluated in 3 zones with cracks on the surface of the cast iron cylinder of the Yankee dryer using a axisymmetric 2D model created in the Ansys Workbench program. The values of the concentration factors are compared with the standardized critical values beyond which the operation does not have safety. The calculation is required in practice during the Yankee cylinder verification stages when non-dangerous cracks can be reconditioned by welding.
Zitieren
APA
Boazu, D., & Gavrilescu, I. (2024). EVALUATION OF STRESS INTENSITY FACTORS FOR CRACKS ON THE OUTSIDE OF THE YANKEE PAPER DRYER USING A 2D AXISYMMETRIC FEM MODEL. Annals of ”Dunarea de Jos” University of Galati, Fascicle V, Technologies in machine building. https://doi.org/10.35219/tmb.2019.1.02
Vancouver
Boazu D, Gavrilescu I. EVALUATION OF STRESS INTENSITY FACTORS FOR CRACKS ON THE OUTSIDE OF THE YANKEE PAPER DRYER USING A 2D AXISYMMETRIC FEM MODEL. Annals of ”Dunarea de Jos” University of Galati, Fascicle V, Technologies in machine building. 2024. doi:10.35219/tmb.2019.1.02
BibTeX
@article{Boazu2024,
author = {Boazu, Doina and Gavrilescu, Ionel},
title = {EVALUATION OF STRESS INTENSITY FACTORS FOR CRACKS ON THE OUTSIDE OF THE YANKEE PAPER DRYER USING A 2D AXISYMMETRIC FEM MODEL},
journal = {Annals of ”Dunarea de Jos” University of Galati, Fascicle V, Technologies in machine building},
year = {2024},
doi = {10.35219/tmb.2019.1.02}
}
EUVIMED