Mercury – Method for the determination of mercury vapours in workplace air using atomic absorption spectrometry
The MAK Collection for Occupational Health and Safety · 2025 · 3 (1)
DOI: 10.34865/am743997e2018_w ↗Kurz gefasst
Fachartikel in der Zeitschrift The MAK Collection for Occupational Health and Safety, 2025. Verfasst von Hebisch und 12 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This analytical method is a validated measurement procedure for the determination of mercury vapours in workplace air using atomic absorption spectrometry in a concentration range of one thousandth up to twice the currently valid Occupational Exposure Limit (OEL) or MAK value of 0.02 mg/m3. Both personal and stationary sampling can be performed for risk assessment at work. Sampling is carried out by drawing a defined volume of air through an adsorption tube filled with hopcalite (mixture of MnO2 and CuO) using a flow‐regulated pump. The flow rate is set to 250 mL/min with a recommended air sample volume of approx. 30 L at a sampling period of 2 hours. After sampling the loaded hopcalite is transferred into a quartz boat and the collected mercury can be analysed directly via atomic absorption spectrometry (AAS). The quantitative determination is based on a calibration function obtained by means of a 10‐point calibration. The limit of quantification is 0.013 mg/m3 based on an air sample volume of approx. 30 L with an expanded uncertainty between 18 and 21%. Joint Publication of the Analytical Subcommittee of the Chemistry Board of Experts of the Expert Committee Raw Materials and Chemical Industry of the German Social Accident Insurance and the Working Group “Air Analyses” of the Permanent Senate Commission of the DFG for the Investigation of Health Hazards of Chemical Compounds in the Work Area.
Schlagwörter
Zitieren
APA
Hebisch, Ralph, Fröhlich, Norbert, Houben, Tamara, Schneider, Wolfgang, Brock, Helmut, T., Hartwig, Andrea, & Commission, M. (2025). Mercury – Method for the determination of mercury vapours in workplace air using atomic absorption spectrometry. The MAK Collection for Occupational Health and Safety, 3(1). https://doi.org/10.34865/am743997e2018_w
Vancouver
Hebisch, Ralph, Fröhlich, Norbert, Houben, Tamara, et al. Mercury – Method for the determination of mercury vapours in workplace air using atomic absorption spectrometry. The MAK Collection for Occupational Health and Safety. 2025;3(1). doi:10.34865/am743997e2018_w
BibTeX
@article{Hebisch2025,
author = {Hebisch and Ralph and Fröhlich and Norbert and Houben and Tamara and Schneider and Wolfgang and Brock and Helmut, Thomas and Hartwig and Andrea and Commission, MAK},
title = {Mercury – Method for the determination of mercury vapours in workplace air using atomic absorption spectrometry},
journal = {The MAK Collection for Occupational Health and Safety},
year = {2025},
volume = {3},
number = {1},
doi = {10.34865/am743997e2018_w}
}
EUVIMED