Reverse Engineering Applied to a Circuit Breaker Lever: Case Study
JOURNAL OF BIOENGINEERING, TECHNOLOGIES AND HEALTH · 22.03.2026 · 9 (2) · 142-148
DOI: 10.34178/jbth.v9i2.581 ↗Kurz gefasst
Fachartikel in der Zeitschrift JOURNAL OF BIOENGINEERING, TECHNOLOGIES AND HEALTH, online erschienen am 22.03.2026. Verfasst von Alex Francisco dos Santos Ribeiro Junior und 4 weiteren Autor:innen.
Abstract (Originalsprache)
The obsolescence of components in industrial systems has become a significant and growing challenge for corrective maintenance and operational continuity of complex and high-cost equipment. To address this issue, this work proposes an integrated multidisciplinary approach combining reverse engineering, design for additive manufacturing, structural simulation, and 3D printing technique for recovering and refurbishing obsolete components. As a detailed case study, the functional restoration of a high-power circuit breaker used in a hospital environment was performed, where conventional replacement would involve high costs and prolonged downtime, with direct impact on system safety and reliability. The process involved precise 3D scanning of the original component, followed by parametric modeling with geometric and structural optimization. Computational simulations were conducted to verify mechanical performance under operating conditions. The component was manufactured using an additive manufacturing technique with high-performance engineering resin. The result was a carefully redesigned part showing significant improvements in geometry, strength, and robustness while maintaining full dimensional compatibility and functional interchangeability with the original system. Comprehensive tests demonstrated adequate dimensional accuracy and satisfactory mechanical performance, along with substantial reductions in costs and repair time compared to conventional replacement methods. The developed methodology proved effective as a strategic alternative to address parts’ unavailability in the market, providing greater technical autonomy and flexibility in maintaining complex industrial assets, and highlighting the promising potential of integrating digital technologies with reverse engineering as a sustainable and innovative solution for managing obsolescence challenges in electromechanical systems.
Zitieren
APA
Junior, A. F. D. S. R., Primo, D. P. A., Beal, V. E., Santiago, R. S. D., & Shigueoka, M. O. (2026). Reverse Engineering Applied to a Circuit Breaker Lever: Case Study. JOURNAL OF BIOENGINEERING, TECHNOLOGIES AND HEALTH, 9(2), 142-148. https://doi.org/10.34178/jbth.v9i2.581
Vancouver
Junior AFDSR, Primo DPA, Beal VE, Santiago RSD, Shigueoka MO. Reverse Engineering Applied to a Circuit Breaker Lever: Case Study. JOURNAL OF BIOENGINEERING, TECHNOLOGIES AND HEALTH. 2026;9(2):142-148. doi:10.34178/jbth.v9i2.581
BibTeX
@article{Junior2026,
author = {Junior, Alex Francisco dos Santos Ribeiro and Primo, David Pablo Alves and Beal, Valter Estevão and Santiago, Rodrigo Silveira de and Shigueoka, Marcelo Okada},
title = {Reverse Engineering Applied to a Circuit Breaker Lever: Case Study},
journal = {JOURNAL OF BIOENGINEERING, TECHNOLOGIES AND HEALTH},
year = {2026},
volume = {9},
number = {2},
pages = {142--148},
doi = {10.34178/jbth.v9i2.581}
}
EUVIMED