EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-SA 4.0

Analisis Produktivitas dan Efisiensi Pemuatan Batubara dengan Excavator SK330 menggunakan Metode Double Side Loading

Sony Adeputra Sumarno, Rizky Syaputra, Rian Andriansyah

Jurnal Teknologi · 19.06.2026 · 19 (1) · 91-97

DOI: 10.34151/jurtek.v19i1.5481 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Jurnal Teknologi, online erschienen am 19.06.2026. Verfasst von Sony Adeputra Sumarno und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Loading operations at Run of Mine (ROM) stockpiles play a critical role in determining productivity and operational efficiency in surface coal mining. Ineffective loading geometry and truck–shovel interaction often result in extended cycle times, low equipment utilization, and excessive fuel consumption. This study aims to analyze the productivity and operational efficiency of an excavator SK330 using the double side loading method compared to the conventional single side loading method in coal loading activities at a ROM stockpile. The research applied a quantitative evaluative approach based on field observations and time study measurements. Primary data included excavator and dump truck cycle times, effective working hours, equipment availability, match factor, and fuel consumption. Productivity calculations were conducted using standard mechanical earthmoving equations, while operational efficiency was evaluated through cycle time reduction and fuel ratio analysis. The results indicate that the implementation of the double side loading method increased actual excavator productivity by approximately 24% and theoretical productivity by up to 33%. In addition, average cycle time decreased from 23.0 seconds to 19.39 seconds, effective working efficiency improved from 83.7% to 90%, and fuel consumption per ton of coal was reduced by approximately 33%. These findings demonstrate that the double side loading method significantly improves loading performance, energy efficiency, and equipment utilization. The study concludes that double side loading can be effectively applied as an operational optimization strategy in coal mining loading systems to support higher production targets and more efficient resource use.

Zitieren

APA

Sumarno, S. A., Syaputra, R., & Andriansyah, R. (2026). Analisis Produktivitas dan Efisiensi Pemuatan Batubara dengan Excavator SK330 menggunakan Metode Double Side Loading. Jurnal Teknologi, 19(1), 91-97. https://doi.org/10.34151/jurtek.v19i1.5481

Vancouver

Sumarno SA, Syaputra R, Andriansyah R. Analisis Produktivitas dan Efisiensi Pemuatan Batubara dengan Excavator SK330 menggunakan Metode Double Side Loading. Jurnal Teknologi. 2026;19(1):91-97. doi:10.34151/jurtek.v19i1.5481

BibTeX
@article{Sumarno2026,
  author = {Sumarno, Sony Adeputra and Syaputra, Rizky and Andriansyah, Rian},
  title = {Analisis Produktivitas dan Efisiensi Pemuatan Batubara dengan Excavator SK330 menggunakan Metode Double Side Loading},
  journal = {Jurnal Teknologi},
  year = {2026},
  volume = {19},
  number = {1},
  pages = {91--97},
  doi = {10.34151/jurtek.v19i1.5481}
}
Kostenlos starten →