Enhanced Digital Light Processing-Based One-Step 3-Dimensional Printing of Multifunctional Magnetic Soft Robot
Cyborg and Bionic Systems · 2025-01 · 6
DOI: 10.34133/cbsystems.0215 ↗Kurz gefasst
Fachartikel in der Zeitschrift Cyborg and Bionic Systems, online erschienen am 26.02.2025. Verfasst von Zhaoxin Li und 5 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Tribology in Advanced Equipment, Department of Mechanical Engineering, Tsinghua University, Beijing 100084, China. Die Arbeit wurde bisher 22-mal zitiert (Crossref) und nennt 66 Literaturangaben. Der Volltext ist frei in PubMed Central verfügbar. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Soft structures driven by magnetic fields exhibit the characteristics of being unencumbered and rapidly responsive, enabling the fabrication of various soft robots according to specific requirements. However, soft structures made from a single magnetic material cannot meet the multifunctional demands of practical scenarios, necessitating the development of soft robot fabrication technologies with composite structures of diverse materials. A novel enhanced digital light processing (DLP) 3-dimensional (3D) printing technology has been developed, capable of printing composite magnetic structures with different materials in a single step. Furthermore, a soft robot with a hard magnetic material–superparamagnetic material composite was designed and printed, demonstrating its thermal effect under high-frequency magnetic fields and the editability of the magnetic domains of the hard magnetic material. The robot exhibits a range of locomotive behaviors, including crawling, rolling, and swimming. Under the influence of a 1-Hz actuation magnetic field, the normalized velocities for these modes of motion are recorded as 0.31 body length per second for crawling, 1.88 body length per second for rolling, and 0.14 body length per second for swimming. The robot has demonstrated its capacity to navigate uneven terrain, surmount barriers, and engage in directed locomotion, along with the ability to capture and transport objects. Additionally, it has showcased swimming capabilities within environments characterized by low Reynolds numbers and high fluid viscosities, findings that corroborate simulation analyses. The multimaterial 3D printing technology introduced in this research presents extensive potential for the design and manufacturing of multifunctional soft robots.
Autor:innen und Institutionen
- State Key Laboratory of Tribology in Advanced Equipment, Department of Mechanical Engineering, Tsinghua University, Beijing 100084, China.
ORCID-Profile: Zhaoxin Li
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Li, Z., Weng, D., Chen, L., Ma, Y., Wang, Z., & Wang, J. (2025). Enhanced Digital Light Processing-Based One-Step 3-Dimensional Printing of Multifunctional Magnetic Soft Robot. Cyborg and Bionic Systems, 6. https://doi.org/10.34133/cbsystems.0215
Vancouver
Li Z, Weng D, Chen L, Ma Y, Wang Z, Wang J. Enhanced Digital Light Processing-Based One-Step 3-Dimensional Printing of Multifunctional Magnetic Soft Robot. Cyborg and Bionic Systems. 2025;6. doi:10.34133/cbsystems.0215
BibTeX
@article{Li2025,
author = {Li, Zhaoxin and Weng, Ding and Chen, Lei and Ma, Yuan and Wang, Zili and Wang, Jiadao},
title = {Enhanced Digital Light Processing-Based One-Step 3-Dimensional Printing of Multifunctional Magnetic Soft Robot},
journal = {Cyborg and Bionic Systems},
year = {2025},
volume = {6},
doi = {10.34133/cbsystems.0215}
}
EUVIMED