Integrated Design and Fabrication of Pneumatic Soft Robot Actuators in a Single Casting Step
Cyborg and Bionic Systems · 2024-01 · 5
DOI: 10.34133/cbsystems.0137 ↗Kurz gefasst
Fachartikel in der Zeitschrift Cyborg and Bionic Systems, online erschienen am 17.07.2024. Verfasst von Afonso Silva und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, University of Coimbra, CEMMPRE, ARISE, Coimbra, Portugal. Die Arbeit wurde bisher 39-mal zitiert (Crossref) und nennt 71 Literaturangaben. Der Volltext ist frei in PubMed Central verfügbar. Gefördert von: Fundação para a Ciência e a Tecnologia.
Abstract (Originalsprache)
Bio-inspired soft robots have already shown the ability to handle uncertainty and adapt to unstructured environments. However, their availability is partially restricted by time-consuming, costly, and highly supervised design-fabrication processes, often based on resource-intensive iterative workflows. Here, we propose an integrated approach targeting the design and fabrication of pneumatic soft actuators in a single casting step. Molds and sacrificial water-soluble hollow cores are printed using fused filament fabrication. A heated water circuit accelerates the dissolution of the core’s material and guarantees its complete removal from the actuator walls, while the actuator’s mechanical operability is defined through finite element analysis. This enables the fabrication of actuators with non-uniform cross-sections under minimal supervision, thereby reducing the number of iterations necessary during the design and fabrication processes. Three actuators capable of bending and linear motion were designed, fabricated, integrated, and demonstrated as 3 different bio-inspired soft robots, an earthworm-inspired robot, a 4-legged robot, and a robotic gripper. We demonstrate the availability, versatility, and effectiveness of the proposed methods, contributing to accelerating the design and fabrication of soft robots. This study represents a step toward increasing the accessibility of soft robots to people at a lower cost.
Autor:innen und Institutionen
- Department of Mechanical Engineering, University of Coimbra, CEMMPRE, ARISE, Coimbra, Portugal.
ORCID-Profile: Afonso Silva, Diogo Fonseca, Diogo M Neto, Mihail Babcinschi, Pedro Neto
Förderung
- Fundação para a Ciência e a Tecnologia
Zitieren
APA
Silva, A., Fonseca, D., Neto, D. M., Babcinschi, M., & Neto, P. (2024). Integrated Design and Fabrication of Pneumatic Soft Robot Actuators in a Single Casting Step. Cyborg and Bionic Systems, 5. https://doi.org/10.34133/cbsystems.0137
Vancouver
Silva A, Fonseca D, Neto DM, Babcinschi M, Neto P. Integrated Design and Fabrication of Pneumatic Soft Robot Actuators in a Single Casting Step. Cyborg and Bionic Systems. 2024;5. doi:10.34133/cbsystems.0137
BibTeX
@article{Silva2024,
author = {Silva, Afonso and Fonseca, Diogo and Neto, Diogo M and Babcinschi, Mihail and Neto, Pedro},
title = {Integrated Design and Fabrication of Pneumatic Soft Robot Actuators in a Single Casting Step},
journal = {Cyborg and Bionic Systems},
year = {2024},
volume = {5},
doi = {10.34133/cbsystems.0137}
}
EUVIMED