Reconstruction of a reverberant sound source coupled to a large cross-section duct
INTER-NOISE and NOISE-CON Congress and Conference Proceedings · 20.07.2026 · 273 (2) · 416-422
DOI: 10.3397/nc_2026_0073 ↗Kurz gefasst
Fachartikel in der Zeitschrift INTER-NOISE and NOISE-CON Congress and Conference Proceedings, erschienen am 20.07.2026. Verfasst von David Neihguk und 1 weiteren Autor:innen.
Abstract (Originalsprache)
Noise control engineers are often interested in determining the sound pressure level at the end of a duct. For engines with small mufflers attached, plane wave propagation can be assumed, and the source can be modeled as a pressure source and source impedance. In this research, a source model is developed for a source where plane wave propagation cannot be assumed. A collection of acoustic free velocities is used to simulate a reverberation room with loudspeaker attached to a duct. A set of acoustic free velocities is defined at the chamber to duct interface, and the acoustic free velocities are determined using an inverse approach. First, sound pressures are measured at several locations in the duct with the loudspeaker turned on in the source room. Secondly, acoustic transfer functions are measured from the acoustic free velocity source positions to receiver locations inside the duct with the loudspeaker turned off. Acoustic free velocities are then determined using the measured transfer functions and sound pressures. The duct is then modified, and the reconstructed free velocities are used to predict changes in sound pressure level resulting from modifications to the duct treatment. The predicted sound pressure levels show good agreement with experimental measurements.
Zitieren
APA
Neihguk, D., & Herrin, D. W. (2026). Reconstruction of a reverberant sound source coupled to a large cross-section duct. INTER-NOISE and NOISE-CON Congress and Conference Proceedings, 273(2), 416-422. https://doi.org/10.3397/nc_2026_0073
Vancouver
Neihguk D, Herrin DW. Reconstruction of a reverberant sound source coupled to a large cross-section duct. INTER-NOISE and NOISE-CON Congress and Conference Proceedings. 2026;273(2):416-422. doi:10.3397/nc_2026_0073
BibTeX
@article{Neihguk2026,
author = {Neihguk, David and Herrin, David W.},
title = {Reconstruction of a reverberant sound source coupled to a large cross-section duct},
journal = {INTER-NOISE and NOISE-CON Congress and Conference Proceedings},
year = {2026},
volume = {273},
number = {2},
pages = {416--422},
doi = {10.3397/nc_2026_0073}
}
EUVIMED