Floor vibration measurement on soft floor coverings like carpets
INTER-NOISE and NOISE-CON Congress and Conference Proceedings · 20.07.2026 · 273 (2) · 345-352
DOI: 10.3397/nc_2026_0064 ↗Kurz gefasst
Fachartikel in der Zeitschrift INTER-NOISE and NOISE-CON Congress and Conference Proceedings, erschienen am 20.07.2026. Verfasst von Sunit Girdhar und 3 weiteren Autor:innen.
Abstract (Originalsprache)
Noise control engineers and test engineers often run into situations where acceleration must be measured on structures with a carpet finish. Vibration levels at the base structure are of interest, but the accelerometer mounting method on carpet finish may have a significant impact on the measured response. Additionally, these tests often need to be non-destructive so the carpet finish stays intact. In this work, the authors evaluated different ways to mount an accelerometer on carpet and compared the responses from baseline values measured directly on the base structure. Painter's tape and doublesided tape provide a good approximation below 160 Hz. Another method presented by Tomita et al. [1] was also found to provide promising results.
Zitieren
APA
Girdhar, S., LoVerde, J., Dong, W., & Rawlings, S. (2026). Floor vibration measurement on soft floor coverings like carpets. INTER-NOISE and NOISE-CON Congress and Conference Proceedings, 273(2), 345-352. https://doi.org/10.3397/nc_2026_0064
Vancouver
Girdhar S, LoVerde J, Dong W, Rawlings S. Floor vibration measurement on soft floor coverings like carpets. INTER-NOISE and NOISE-CON Congress and Conference Proceedings. 2026;273(2):345-352. doi:10.3397/nc_2026_0064
BibTeX
@article{Girdhar2026,
author = {Girdhar, Sunit and LoVerde, John and Dong, Wayland and Rawlings, Samantha},
title = {Floor vibration measurement on soft floor coverings like carpets},
journal = {INTER-NOISE and NOISE-CON Congress and Conference Proceedings},
year = {2026},
volume = {273},
number = {2},
pages = {345--352},
doi = {10.3397/nc_2026_0064}
}
EUVIMED