Comparative assessment of windscreen geometries for aeroacoustic measurements
INTER-NOISE and NOISE-CON Congress and Conference Proceedings · 20.07.2026 · 273 (2) · 277-288
DOI: 10.3397/nc_2026_0048 ↗Kurz gefasst
Fachartikel in der Zeitschrift INTER-NOISE and NOISE-CON Congress and Conference Proceedings, erschienen am 20.07.2026. Verfasst von Alyssa Ann Brucchieri und 3 weiteren Autor:innen.
Abstract (Originalsprache)
In aeroacoustic wind tunnel testing, microphone signals of interest can be contaminated by flow-induced noise. Windscreens mitigate this issue by reducing non-acoustic disturbances while allowing acoustic waves to pass through. However, trade-offs exist, as windscreens may attenuate high-frequency content or introduce reflections that affect data validity. This study investigated five windscreen geometries to identify the most effective design for acoustic performance and reduction of airflow interference. A wire "legacy cage," currently used in the NASA Langley Low Speed Aeroacoustic Wind Tunnel (LSAWT), served as the baseline. Four additional designs were 3D printed with varied bar diameter (0.1", 0.2") and microphone position within the cage (symmetric, asymmetric). The effects of angle of incidence (AOI), the presence of a grid cap, and the number of membranes covering the cage were also examined to assess their influence on acoustic performance and to validate manufacturer-provided microphone corrections. Results indicated that the 0.1″ asymmetric cage provided the best overall performance, outperforming the legacy design and exhibiting a maximum deviation of 1.5 dB relative to a bare microphone at 0° AOI. Additionally, manufacturer corrections for non-zero angles of incidence and grid cap usage were validated, increasing confidence in their application for wind-screened acoustic measurements.
Zitieren
APA
Brucchieri, A. A., Zawodny, N., Stutz, C. M., & Houston, M. (2026). Comparative assessment of windscreen geometries for aeroacoustic measurements. INTER-NOISE and NOISE-CON Congress and Conference Proceedings, 273(2), 277-288. https://doi.org/10.3397/nc_2026_0048
Vancouver
Brucchieri AA, Zawodny N, Stutz CM, Houston M. Comparative assessment of windscreen geometries for aeroacoustic measurements. INTER-NOISE and NOISE-CON Congress and Conference Proceedings. 2026;273(2):277-288. doi:10.3397/nc_2026_0048
BibTeX
@article{Brucchieri2026,
author = {Brucchieri, Alyssa Ann and Zawodny, Nik and Stutz, Colin Matthew and Houston, Mary},
title = {Comparative assessment of windscreen geometries for aeroacoustic measurements},
journal = {INTER-NOISE and NOISE-CON Congress and Conference Proceedings},
year = {2026},
volume = {273},
number = {2},
pages = {277--288},
doi = {10.3397/nc_2026_0048}
}
EUVIMED