Frequency-Based Characterization and Real-Time Alerting System of Industrial Flare Thumping Noise Using Advanced Monitoring - A Case Study
INTER-NOISE and NOISE-CON Congress and Conference Proceedings · 20.07.2026 · 273 (2) · 67-76
DOI: 10.3397/nc_2026_0014 ↗Kurz gefasst
Fachartikel in der Zeitschrift INTER-NOISE and NOISE-CON Congress and Conference Proceedings, erschienen am 20.07.2026. Verfasst von Pierre-Claude Ostiguy und 2 weiteren Autor:innen.
Abstract (Originalsprache)
Industrial flare stacks can generate intermittent low frequency 'thump' noise that is highly audible over long distances. On complex industrial sites where noise levels are high, observation of the impact of that phenomenon can be limited. Control rooms require objective tools to anticipate community noise issues while maintaining an efficient combustion process. Conventional monitoring based only on overall sound levels often fails to distinguish these flare events from other industrial activities, making it challenging to provide timely and reliable warnings. This paper presents a novel community noise control technique based on a network of permanent monitoring stations combining noise and vibration measurements to identify the specific spectral signature of the flare stack. Continuous frequency analysis was used to characterize the operating regimes associated with the most disturbing conditions, and these signatures were integrated into a real time alert system dedicated to the control room. The system allowed operators to be notified before the noise became problematic for residents and to adjust process parameters accordingly. Results show that frequency-based monitoring can reliably isolate individual flare-related events in a contaminated and multi-source environment, supporting both community impact reduction and optimization of combustion operations.
Zitieren
APA
Ostiguy, P., Mackenzie, R., & Borsoni, L. (2026). Frequency-Based Characterization and Real-Time Alerting System of Industrial Flare Thumping Noise Using Advanced Monitoring - A Case Study. INTER-NOISE and NOISE-CON Congress and Conference Proceedings, 273(2), 67-76. https://doi.org/10.3397/nc_2026_0014
Vancouver
Ostiguy P, Mackenzie R, Borsoni L. Frequency-Based Characterization and Real-Time Alerting System of Industrial Flare Thumping Noise Using Advanced Monitoring - A Case Study. INTER-NOISE and NOISE-CON Congress and Conference Proceedings. 2026;273(2):67-76. doi:10.3397/nc_2026_0014
BibTeX
@article{Ostiguy2026,
author = {Ostiguy, Pierre-Claude and Mackenzie, Roderick and Borsoni, Laurianne},
title = {Frequency-Based Characterization and Real-Time Alerting System of Industrial Flare Thumping Noise Using Advanced Monitoring - A Case Study},
journal = {INTER-NOISE and NOISE-CON Congress and Conference Proceedings},
year = {2026},
volume = {273},
number = {2},
pages = {67--76},
doi = {10.3397/nc_2026_0014}
}
EUVIMED