EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Multi-Model Assessment and Experimental Validation of a Custom High-Camber Airfoil for Wind-Lens Technology Application

Ayalew Bekele Demie, Venkata Ramayya Ancha, Mulu Bayray Kahsay

Wind · 09.06.2026 · 6 (2) · 28

DOI: 10.3390/wind6020028 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Wind, online erschienen am 09.06.2026. Verfasst von Ayalew Bekele Demie und 2 weiteren Autor:innen. Die Arbeit nennt 77 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Diffusers in diffuser-augmented wind turbines (DAWTs) require high-camber airfoils operating at low Reynolds numbers (Re), and their laminar separation bubbles (LSB) significantly complicate aerodynamic predictions. No prior study has experimentally validated XFOIL, k-ω SST, and γ-Re_θ models against simultaneous lift, drag, and chord-wise pressure coefficient (Cp) measurements for the customized high-camber airfoil at Re = 68,000 (68k), 118,000 (118k), and 159,000 (159k). Lift, drag, and Cp distributions were measured experimentally. The γ-Re_θ model demonstrated superior performance, achieving a lift maximum absolute percent error of 1.6–3.4%, near-zero bias, and a coefficient of determination >0.99. It accurately captured the LSB pressure plateau at mid-chord, with mean gross-averaged Cp percent errors of 8.1% and 2.1% for upper and lower surfaces, respectively. The k-ω SST model overpredicted lift by up to +9.8% at Re = 68k and underpredicted drag by up to 66%. XFOIL is unreliable specifically for separated transitional flows at Re < 118k, but improves at Re = 159k. The experimental dataset and validated transition-sensitive RANS approach provide a foundation for low-Re airfoil and DAWT diffuser design. Future work should extend measurements below Re = 50k and above 200k, including post-stall conditions, and system-level design of DAWT.

Zitieren

APA

Demie, A. B., Ancha, V. R., & Kahsay, M. B. (2026). Multi-Model Assessment and Experimental Validation of a Custom High-Camber Airfoil for Wind-Lens Technology Application. Wind, 6(2), 28. https://doi.org/10.3390/wind6020028

Vancouver

Demie AB, Ancha VR, Kahsay MB. Multi-Model Assessment and Experimental Validation of a Custom High-Camber Airfoil for Wind-Lens Technology Application. Wind. 2026;6(2):28. doi:10.3390/wind6020028

BibTeX
@article{Demie2026,
  author = {Demie, Ayalew Bekele and Ancha, Venkata Ramayya and Kahsay, Mulu Bayray},
  title = {Multi-Model Assessment and Experimental Validation of a Custom High-Camber Airfoil for Wind-Lens Technology Application},
  journal = {Wind},
  year = {2026},
  volume = {6},
  number = {2},
  pages = {28},
  doi = {10.3390/wind6020028}
}
Kostenlos starten →