Validation of Wind Turbine Models Based on Test Bench Measurements: A System for Theoretical Representation of the Grid Replica
Wind · 26.07.2023 · 3 (3) · 302-319
DOI: 10.3390/wind3030018 ↗Kurz gefasst
Fachartikel in der Zeitschrift Wind, online erschienen am 26.07.2023. Verfasst von Anica Frehn und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: German Federal Ministry of Economic Affairs and Energy.
Abstract (Originalsprache)
In recent years, nacelle test benches for wind turbines have been developed internationally. New standards are currently being developed that explicitly refer to the measurement of the electrical properties of wind turbines on these test benches. Thus, they are suitable for measuring the electrical properties required for certification. Another part of the certification is the creation and validation of suitable models of the wind turbine, which are used for stability analyses of the utility grid. Validation requires a suitable model of grid replication on the test benches, which is not yet covered by any applicable standard. Such models should be as simplified a representation of the artificial grid replication as possible to ensure that they are accessible to certification bodies. A model of the grid emulator installed at the CWD of RWTH Aachen University, which was validated with real measurement data, serves as a reference. A step-by-step reduction of the model’s depth up to the system’s technical representation is followed by a model evaluation with respect to the level of detail and an analysis of time and frequency. The evaluation shows that even a highly simplified model consisting of a reference voltage and an impedance replica meets the requirements for the validation of wind turbine models according to IEC 61400-27-2.
Förderung
- German Federal Ministry of Economic Affairs and Energy
Zitieren
APA
Frehn, A., Sdun, J., Grune, R., & Monti, A. (2023). Validation of Wind Turbine Models Based on Test Bench Measurements: A System for Theoretical Representation of the Grid Replica. Wind, 3(3), 302-319. https://doi.org/10.3390/wind3030018
Vancouver
Frehn A, Sdun J, Grune R, Monti A. Validation of Wind Turbine Models Based on Test Bench Measurements: A System for Theoretical Representation of the Grid Replica. Wind. 2023;3(3):302-319. doi:10.3390/wind3030018
BibTeX
@article{Frehn2023,
author = {Frehn, Anica and Sdun, Jens and Grune, Rayk and Monti, Antonello},
title = {Validation of Wind Turbine Models Based on Test Bench Measurements: A System for Theoretical Representation of the Grid Replica},
journal = {Wind},
year = {2023},
volume = {3},
number = {3},
pages = {302--319},
doi = {10.3390/wind3030018}
}
EUVIMED