EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design and Powertrain Sizing of an Electric Traction System Based on Commercially Available Components for Small-Scale Rural Vehicles

Carlos Augusto Marcondes dos Santos, Thais Santos Castro, Teófilo Miguel de Souza

World Electric Vehicle Journal · 17.11.2026 · 17 (11) · 602

DOI: 10.3390/wevj17110602 ↗

Kurz gefasst

Fachartikel in der Zeitschrift World Electric Vehicle Journal, online erschienen am 17.11.2026. Verfasst von Carlos Augusto Marcondes dos Santos und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The electrification of small-scale rural vehicles offers a potential alternative to conventional fuel-powered vehicles for agricultural applications. This study presents the sizing of the motor and the transmission of an electric traction system for a small-scale rural utility vehicle intended for family farming. Commercially available components were prioritized to limit costs, although no quantitative economic assessment was performed. A 15-CV, 1800-rpm motor was evaluated analytically for speeds of up to 40 km/h and slopes of up to 50% at full load. The power required to start the fully loaded vehicle ranges from 2.42 CV (level terrain) to 13.03 CV (50% slope), and a two-range transmission with overall ratios of 5.1–55.4 is required. A longitudinal dynamics simulation, used as a consistency check, reproduced these values; with rolling resistance, aerodynamic drag, and drivetrain losses, continuous climbing of the 50% slope required 12.86–14.48 CV. With a 20% design margin derived from a sensitivity analysis, the motor torque suffices for continuous full-load climbing of slopes up to 40% on soil. For a 4 × 2 drive, adhesion, not motor power, limits full-load climbing on soil to about 20–33%; of the 7.5–20-CV ratings evaluated, 15 CV is the smallest that does not reduce this limit further. All results are theoretical and must be confirmed by prototype tests.

Zitieren

APA

Santos, C. A. M. D., Castro, T. S., & Souza, T. M. D. (2026). Design and Powertrain Sizing of an Electric Traction System Based on Commercially Available Components for Small-Scale Rural Vehicles. World Electric Vehicle Journal, 17(11), 602. https://doi.org/10.3390/wevj17110602

Vancouver

Santos CAMD, Castro TS, Souza TMD. Design and Powertrain Sizing of an Electric Traction System Based on Commercially Available Components for Small-Scale Rural Vehicles. World Electric Vehicle Journal. 2026;17(11):602. doi:10.3390/wevj17110602

BibTeX
@article{Santos2026,
  author = {Santos, Carlos Augusto Marcondes dos and Castro, Thais Santos and Souza, Teófilo Miguel de},
  title = {Design and Powertrain Sizing of an Electric Traction System Based on Commercially Available Components for Small-Scale Rural Vehicles},
  journal = {World Electric Vehicle Journal},
  year = {2026},
  volume = {17},
  number = {11},
  pages = {602},
  doi = {10.3390/wevj17110602}
}
Kostenlos starten →