From Manufacturing Measurements to Variability-Aware NVH Simulation of Electric-Vehicle Gearboxes: A Simulation-Ready Parameter Framework
World Electric Vehicle Journal · 19.07.2026 · 17 (7) · 374
DOI: 10.3390/wevj17070374 ↗Kurz gefasst
Fachartikel in der Zeitschrift World Electric Vehicle Journal, online erschienen am 19.07.2026. Verfasst von Krisztian Horvath. Die Arbeit nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Culture and Innovation of Hungary.
Abstract (Originalsprache)
Electric-vehicle gearboxes operate at high rotational speeds and under low acoustic masking, making tonal excitation and unit-to-unit variability important design concerns. Contemporary loaded tooth contact, multibody, finite-element, and vibroacoustic models can represent the nominal excitation–transfer–response–radiation chain in considerable detail, but their inputs often remain disconnected from the manufactured and assembled gearbox. This review develops a structured framework for identifying which physical parameters, numerical representations, and validation evidence are required before a model can credibly represent a nominal design, a tolerance space, an as-built unit, or a production population. Parameters are classified jointly based on the physical origin and noise, vibration, and harshness (NVH) function and are mapped to contact, system-dynamic, structural, acoustic, and hybrid data-driven models. Four simulation-readiness levels are defined: nominal, tolerance-based, measurement-based, and variability-aware. Explicit transition gates, validation quantities, and permitted claims are assigned to each level. A stage-specific validation matrix distinguishes contact-level, interface-force, structural-response, and acoustic evidence. Literature-grounded quantitative examples demonstrate validated elastic multibody modeling and manufacturing-data-based gear-whine prediction while clarifying the limits of the available evidence. The framework provides a traceable basis for model planning, measurement selection, uncertainty analysis, and readiness-aware reporting of electric-vehicle gearbox NVH simulations.
Förderung
- Ministry of Culture and Innovation of Hungary
Zitieren
APA
Horvath, K. (2026). From Manufacturing Measurements to Variability-Aware NVH Simulation of Electric-Vehicle Gearboxes: A Simulation-Ready Parameter Framework. World Electric Vehicle Journal, 17(7), 374. https://doi.org/10.3390/wevj17070374
Vancouver
Horvath K. From Manufacturing Measurements to Variability-Aware NVH Simulation of Electric-Vehicle Gearboxes: A Simulation-Ready Parameter Framework. World Electric Vehicle Journal. 2026;17(7):374. doi:10.3390/wevj17070374
BibTeX
@article{Horvath2026,
author = {Horvath, Krisztian},
title = {From Manufacturing Measurements to Variability-Aware NVH Simulation of Electric-Vehicle Gearboxes: A Simulation-Ready Parameter Framework},
journal = {World Electric Vehicle Journal},
year = {2026},
volume = {17},
number = {7},
pages = {374},
doi = {10.3390/wevj17070374}
}
EUVIMED