EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A New Approach to In-Wheel Motor Solutions for Electric Vehicles

Valentin Popovici, Ioana Ramona Grigoraș, Edward Rakosi, Tudor Marian Ulian, Gheorghe Manolache, Alexandru Gabriel Popa, Ștefan Petrovan

World Electric Vehicle Journal · 09.02.2026 · 17 (2) · 87

DOI: 10.3390/wevj17020087 ↗

Kurz gefasst

Fachartikel in der Zeitschrift World Electric Vehicle Journal, online erschienen am 09.02.2026. Verfasst von Valentin Popovici und 6 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The In-Wheel Motor represents a non-conventional propulsion architecture in which the electric motor is integrated into the wheel, offering advantages such as improved energy efficiency, individual torque control, and drivetrain simplification. In this study, two architectures, inboard and outboard, were developed using an original three-dimensional motor–brake–suspension–steering assembly model, in which disk brake position and In-Wheel Motor integration act as primary design drivers influencing vehicle dynamics. Both architectures were developed in CATIA V5 and exported to Altair Motion 2025 for multibody dynamics simulations. The study evaluates the impact of inboard versus outboard disk brake positioning on vehicle dynamics and provides a qualitative assessment of the associated architectures in terms of mechanical complexity, serviceability, sealing requirements, bearing load asymmetry, and packaging constraints. The results indicate that the inboard architecture exhibits more linear and stable kinematics and compliance (K&C) behavior compared to the outboard configuration, at the expense of increased mechanical complexity and reduced serviceability. By contrast, the outboard architecture preserves a simpler, more conventional MacPherson-like layout with a lower component count and improved service access but is dynamically outperformed under the imposed geometric constraints of the present study.

Zitieren

APA

Popovici, V., Grigoraș, I. R., Rakosi, E., Ulian, T. M., Manolache, G., Popa, A. G., & Petrovan, Ș. (2026). A New Approach to In-Wheel Motor Solutions for Electric Vehicles. World Electric Vehicle Journal, 17(2), 87. https://doi.org/10.3390/wevj17020087

Vancouver

Popovici V, Grigoraș IR, Rakosi E, Ulian TM, Manolache G, Popa AG, et al. A New Approach to In-Wheel Motor Solutions for Electric Vehicles. World Electric Vehicle Journal. 2026;17(2):87. doi:10.3390/wevj17020087

BibTeX
@article{Popovici2026,
  author = {Popovici, Valentin and Grigoraș, Ioana Ramona and Rakosi, Edward and Ulian, Tudor Marian and Manolache, Gheorghe and Popa, Alexandru Gabriel and Petrovan, Ștefan},
  title = {A New Approach to In-Wheel Motor Solutions for Electric Vehicles},
  journal = {World Electric Vehicle Journal},
  year = {2026},
  volume = {17},
  number = {2},
  pages = {87},
  doi = {10.3390/wevj17020087}
}
Kostenlos starten →