EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Thermally Triggered Interfacial Debonding for Lid-to-Frame Disassembly in Electric Vehicle Battery Packs

Vasco C. M. B. Rodrigues, Mohammad Mehdi Kasaei, Eduardo A. S. Marques, Ricardo J. C. Carbas, Robin Szymanski, Maxime Olive, Lucas F. M. da Silva

World Electric Vehicle Journal · 25.01.2026 · 17 (2) · 59

DOI: 10.3390/wevj17020059 ↗

Kurz gefasst

Fachartikel in der Zeitschrift World Electric Vehicle Journal, online erschienen am 25.01.2026. Verfasst von Vasco C. M. B. Rodrigues und 6 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Portuguese Foundation for Science and Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The rise in electric vehicles (EVs) with lithium-ion batteries supports net-zero goals, but the increasing demand will inevitably generate more battery waste. Current pack designs often rely on permanent joining techniques, which hinder disassembly and thereby limit serviceability, reuse and recycling. A critical challenge is the removal of the battery lid, typically bonded to the pack frame with sealant adhesives. In the absence of design for disassembly requirements for OEMs, this study investigates a novel debonding strategy focused on the lid-to-frame bonding. A silane-based adhesive commonly used in battery packs is first characterised under tensile, shear and mode I conditions to establish the baseline performance in the range of flexible adhesive properties. Herein, a heat-activated primer is introduced as a debondable interfacial layer between the adhesive and the substrate. Upon activation at 150 °C, the primer significantly reduces adhesion, around 98% of the initial joint strength, enabling room temperature debonding. The primer demonstrates strong compatibility with epoxy and polyurethane adhesives, but its performance with silane-based systems still needs to be improved in terms of the primer’s compatibility with silane-based adhesives. Finally, a small-scale testing apparatus is developed to evaluate primer effectiveness in the disassembly of battery lids. This approach represents a promising step toward more serviceable, recyclable and sustainable battery systems.

Förderung

  • the Portuguese Foundation for Science and Technology

Zitieren

APA

Rodrigues, V. C. M. B., Kasaei, M. M., Marques, E. A. S., Carbas, R. J. C., Szymanski, R., Olive, M., & Silva, L. F. M. D. (2026). Thermally Triggered Interfacial Debonding for Lid-to-Frame Disassembly in Electric Vehicle Battery Packs. World Electric Vehicle Journal, 17(2), 59. https://doi.org/10.3390/wevj17020059

Vancouver

Rodrigues VCMB, Kasaei MM, Marques EAS, Carbas RJC, Szymanski R, Olive M, et al. Thermally Triggered Interfacial Debonding for Lid-to-Frame Disassembly in Electric Vehicle Battery Packs. World Electric Vehicle Journal. 2026;17(2):59. doi:10.3390/wevj17020059

BibTeX
@article{Rodrigues2026,
  author = {Rodrigues, Vasco C. M. B. and Kasaei, Mohammad Mehdi and Marques, Eduardo A. S. and Carbas, Ricardo J. C. and Szymanski, Robin and Olive, Maxime and Silva, Lucas F. M. da},
  title = {Thermally Triggered Interfacial Debonding for Lid-to-Frame Disassembly in Electric Vehicle Battery Packs},
  journal = {World Electric Vehicle Journal},
  year = {2026},
  volume = {17},
  number = {2},
  pages = {59},
  doi = {10.3390/wevj17020059}
}
Kostenlos starten →