EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

An Optimization Design Method for Flat-Wire Motors Based on Combined Rotor Slot Structures

Xiangjun Bi, Hongbin Yin, Yan Chen, Mingyang Luo, Xiaojun Wang, Wenjing Hu

World Electric Vehicle Journal · 04.08.2025 · 16 (8) · 439

DOI: 10.3390/wevj16080439 ↗

Kurz gefasst

Fachartikel in der Zeitschrift World Electric Vehicle Journal, online erschienen am 04.08.2025. Verfasst von Xiangjun Bi und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Shandong Province, Key Laboratory of Precision Manufacturing and Special Processing in Shandong Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To enhance the electromagnetic performance of flat-wire permanent magnet synchronous motors, three different groove structures were designed for the rotor, and a multi-objective optimization algorithm combining a genetic algorithm (GA) with the TOPSIS method was proposed. Firstly, an 8-pole 48-slot flat-wire motor model was established, and the cogging torque was analytically calculated to compare the motor’s performance under different groove schemes. Secondly, global multi-objective optimization of the rotor groove dimensions was performed using a combined simulation approach involving Maxwell, Workbench, and Optislang, and the optimal rotor groove size structure was selected using the TOPSIS method. Finally, a comparative analysis of the motor’s performance under both rated-load and no-load conditions was conducted for the pre- and post-optimization designs, followed by verification of the mechanical strength of the optimized rotor structure. The research results demonstrate that the combined optimization approach utilizing the genetic algorithm and the TOPSIS method significantly enhances the torque characteristics of the motor. The computational results indicate that the average torque is increased to 165.32 N·m, with the torque ripple reduced from 28.37% to 13.32% and the cogging torque decreased from 896.88 mN·m to 187.9 mN·m. Moreover, the total distortion rates of the air-gap magnetic flux density and the no-load back EMF are significantly suppressed, confirming the rationality of the proposed motor design.

Förderung

  • National Natural Science Foundation of China
  • Natural Science Foundation of Shandong Province
  • Key Laboratory of Precision Manufacturing and Special Processing in Shandong Province

Zitieren

APA

Bi, X., Yin, H., Chen, Y., Luo, M., Wang, X., & Hu, W. (2025). An Optimization Design Method for Flat-Wire Motors Based on Combined Rotor Slot Structures. World Electric Vehicle Journal, 16(8), 439. https://doi.org/10.3390/wevj16080439

Vancouver

Bi X, Yin H, Chen Y, Luo M, Wang X, Hu W. An Optimization Design Method for Flat-Wire Motors Based on Combined Rotor Slot Structures. World Electric Vehicle Journal. 2025;16(8):439. doi:10.3390/wevj16080439

BibTeX
@article{Bi2025,
  author = {Bi, Xiangjun and Yin, Hongbin and Chen, Yan and Luo, Mingyang and Wang, Xiaojun and Hu, Wenjing},
  title = {An Optimization Design Method for Flat-Wire Motors Based on Combined Rotor Slot Structures},
  journal = {World Electric Vehicle Journal},
  year = {2025},
  volume = {16},
  number = {8},
  pages = {439},
  doi = {10.3390/wevj16080439}
}
Kostenlos starten →