EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Novel Tri-Mode Bidirectional DC–DC Converter for Enhancing Regenerative Braking Efficiency and Speed Control in Electric Vehicles

Noah Dias, Anant Naik, Vinayak Shet

World Electric Vehicle Journal · 02.01.2024 · 15 (1) · 12

DOI: 10.3390/wevj15010012 ↗

Kurz gefasst

Fachartikel in der Zeitschrift World Electric Vehicle Journal, online erschienen am 02.01.2024. Verfasst von Noah Dias und 2 weiteren Autor:innen. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 75 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A bidirectional dc–dc converter is used to match the voltage levels between a low-voltage battery and a high-voltage traction machine in an electric vehicle. Using a conventional bidirectional converter with a standard voltage range, there is a limitation to the fine variation in the electric vehicle speed. During the regenerative braking process, when the speed decreases below a certain value, the generated voltage is insufficient to charge the battery, hence the regenerated energy cannot be stored. This paper proposes a novel bidirectional converter featuring three distinct operational modes: boost, buck and buck-boost. In the normal driving mode, it operates as a boost converter, providing double gain and accommodating a wide voltage range. During regenerative braking, the proposed converter switches to the buck or buck-boost mode based on the control algorithm. This adaptation is intended to either decrease the generated voltage to charge the battery effectively or to raise the voltage if it is insufficient for charging the battery. This configuration provides voltage stress of half the dc link voltage on the switches. This paper provides a comprehensive analysis of the proposed circuit, a detailed description of the control strategy with pulse generation logic for all switches and a mode transition algorithm. The simulation results of a circuit operating at a 1500 W power level are presented and compared with those of a standard bidirectional converter.

Zitieren

APA

Dias, N., Naik, A., & Shet, V. (2024). A Novel Tri-Mode Bidirectional DC–DC Converter for Enhancing Regenerative Braking Efficiency and Speed Control in Electric Vehicles. World Electric Vehicle Journal, 15(1), 12. https://doi.org/10.3390/wevj15010012

Vancouver

Dias N, Naik A, Shet V. A Novel Tri-Mode Bidirectional DC–DC Converter for Enhancing Regenerative Braking Efficiency and Speed Control in Electric Vehicles. World Electric Vehicle Journal. 2024;15(1):12. doi:10.3390/wevj15010012

BibTeX
@article{Dias2024,
  author = {Dias, Noah and Naik, Anant and Shet, Vinayak},
  title = {A Novel Tri-Mode Bidirectional DC–DC Converter for Enhancing Regenerative Braking Efficiency and Speed Control in Electric Vehicles},
  journal = {World Electric Vehicle Journal},
  year = {2024},
  volume = {15},
  number = {1},
  pages = {12},
  doi = {10.3390/wevj15010012}
}
Kostenlos starten →