Aspen Plus Simulation, Response Surface Methodology-Based Optimization, and Techno-Economic Analysis of Hydrogen-Rich Syngas from Sewage Sludge Gasification
Waste · 06.11.2026 · 4 (4) · 42
DOI: 10.3390/waste4040042 ↗Kurz gefasst
Fachartikel in der Zeitschrift Waste, online erschienen am 06.11.2026. Verfasst von Ikenna Chibuzor Emeji und 2 weiteren Autor:innen. Die Arbeit nennt 94 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The production of syngas from sewage sludge through steam gasification was investigated using an Aspen Plus simulation, Response Surface Methodology (RSM), exergy analysis, and techno-economic assessment framework. An Aspen Plus model was developed and validated against two independent experimental datasets, yielding RMSE values of 4.53 and 4.10 vol.%, respectively. The effects of temperature (500–1000 °C), steam-to-biomass ratio (SBR, 0.1–1.5), and pressure (0.5–6 bar) were investigated using sensitivity analysis, followed by Box–Behnken Design and RSM optimization. Increasing temperature promoted hydrogen production and gasification performance, whereas increasing SBR beyond approximately 0.3 reduced syngas heating value because of steam dilution. Sensitivity analysis identified a favorable region around 800 °C, SBR 0.3, and 1 bar. RSM predicted optimum conditions of 900 °C, SBR 0.244, and 1.5 bar, which were verified using Aspen Plus. Under these conditions, the predicted syngas contained 54.64 vol.% H2, with a syngas yield of 1.546 Nm3 kg−1, lower heating value (LHV) of 11.01 MJ Nm−3, carbon conversion efficiency (CCE) of 99.9%, and cold gas efficiency (CGE) of 62.14%. Exergy analysis yielded an efficiency of 58.9%, with exergy destruction of 239.12 MJ h−1. A techno-economic assessment at 20 kg h−1 estimated a capital investment of USD 0.914 million and operating expenditure of USD 139,769. The levelized cost of syngas (LCOS) was USD 327 MWh−1 (USD 0.327 kWh−1). Utility, maintenance, and labor costs exerted effects on LCOS rather than feedstock handling costs. The integrated framework provides a basis for evaluating sewage sludge steam gasification for sustainable waste valorization and hydrogen-rich syngas production.
Zitieren
APA
Emeji, I. C., Seodigeng, T., & Osifo, P. O. (2026). Aspen Plus Simulation, Response Surface Methodology-Based Optimization, and Techno-Economic Analysis of Hydrogen-Rich Syngas from Sewage Sludge Gasification. Waste, 4(4), 42. https://doi.org/10.3390/waste4040042
Vancouver
Emeji IC, Seodigeng T, Osifo PO. Aspen Plus Simulation, Response Surface Methodology-Based Optimization, and Techno-Economic Analysis of Hydrogen-Rich Syngas from Sewage Sludge Gasification. Waste. 2026;4(4):42. doi:10.3390/waste4040042
BibTeX
@article{Emeji2026,
author = {Emeji, Ikenna Chibuzor and Seodigeng, Tumisang and Osifo, Peter Ogbemudia},
title = {Aspen Plus Simulation, Response Surface Methodology-Based Optimization, and Techno-Economic Analysis of Hydrogen-Rich Syngas from Sewage Sludge Gasification},
journal = {Waste},
year = {2026},
volume = {4},
number = {4},
pages = {42},
doi = {10.3390/waste4040042}
}
EUVIMED