EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Inverse Analysis of Hydraulic Conductivity of the Layer ⑦ Sandy-Pebble Aquifer in Beijing

Ke Wang, Zhiqiang Pan, Wenke Zheng, Fengzhan Hou, Shiming Yang, Kai Wu, Liang Xu, Zhongjian Zhang

Water · 12.11.2026 · 18 (22) · 2824

DOI: 10.3390/w18222824 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Water, online erschienen am 12.11.2026. Verfasst von Ke Wang und 7 weiteren Autor:innen. Die Arbeit nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science and Technology Innovation Program of Xiongan New Area.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Hydraulic conductivity is a key hydrogeological parameter in groundwater seepage analysis and dewatering design. Hydraulic conductivity directly affects the prediction accuracy of groundwater drawdown and dewatering performance. Field single-well and multi-well pumping tests were combined with a three-dimensional unsteady seepage model established using Visual MODFLOW Flex 6.1. An inverse analysis of hydraulic conductivity was conducted for the ⑦ confined sandy-pebble aquifer. The results show that groundwater drawdown during the single-well pumping test was concentrated around the pumping well and decreased with distance. Under multi-well pumping conditions, stabilized drawdown exceeded 15 m at several northern and western observation wells, while eastern and southern wells mainly showed 8–11 m. The single-well inversion yielded a local-scale equivalent hydraulic conductivity of 28.75 m/d, with a mean relative error (MRE) of 3.46%. This value was subsequently used as the initial parameter for evaluating the applicability of a homogeneous hydraulic conductivity under multi-well pumping conditions. The final engineering-scale zonal parameterization comprised an equivalent hydraulic conductivity of 28.75 m/d in the western zone, retained from the single-well inversion, and 90.00 m/d in the eastern zone, obtained through zonal calibration. The resulting calibration MRE was 3.02%. Compared with the homogeneous model, the zonal model achieved closer agreement between simulated and measured drawdowns under the tested multi-well pumping condition, indicating improved calibration performance in representing the observed spatial variation in groundwater response.

Förderung

  • Science and Technology Innovation Program of Xiongan New Area

Zitieren

APA

Wang, K., Pan, Z., Zheng, W., Hou, F., Yang, S., Wu, K., Xu, L., & Zhang, Z. (2026). Inverse Analysis of Hydraulic Conductivity of the Layer ⑦ Sandy-Pebble Aquifer in Beijing. Water, 18(22), 2824. https://doi.org/10.3390/w18222824

Vancouver

Wang K, Pan Z, Zheng W, Hou F, Yang S, Wu K, et al. Inverse Analysis of Hydraulic Conductivity of the Layer ⑦ Sandy-Pebble Aquifer in Beijing. Water. 2026;18(22):2824. doi:10.3390/w18222824

BibTeX
@article{Wang2026,
  author = {Wang, Ke and Pan, Zhiqiang and Zheng, Wenke and Hou, Fengzhan and Yang, Shiming and Wu, Kai and Xu, Liang and Zhang, Zhongjian},
  title = {Inverse Analysis of Hydraulic Conductivity of the Layer ⑦ Sandy-Pebble Aquifer in Beijing},
  journal = {Water},
  year = {2026},
  volume = {18},
  number = {22},
  pages = {2824},
  doi = {10.3390/w18222824}
}
Kostenlos starten →