EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effects of Submerged Swirl-Generating Pier Geometry on Discharge Capacity and Swirling Flow in an Annular-Weir Shaft Spillway

Junjie Hu, Xudong Ma, Beijia Zeng, Weiwei Shi, Ke Dong

Water · 10.11.2026 · 18 (22) · 2811

DOI: 10.3390/w18222811 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Water, online erschienen am 10.11.2026. Verfasst von Junjie Hu und 4 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: CCCC Yangtze River Construction and Development Group Co., Ltd..

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Submerged swirl-generating piers guide inflow toward an annular weir and promote rotating flow in the upper shaft, but also restrict the inlet passages. This study examines the resulting tradeoff using a 1:50 Froude-scaled physical model and three-dimensional Reynolds-averaged Navier–Stokes simulations with an RNG k–ε closure and a volume-of-fluid (VOF) formulation. Pier number N, connection angle θ, and length L are varied over 4~12, 5–25°, and 12~20 m, respectively, in prototype dimensions. Three inlet regimes are observed within the tested range: free-pier flow at H/P < 0.9, transitional flow at 0.9 ≤ H/P ≤ 1.1, and submerged-pier flow at H/P > 1.1. A local discharge-coefficient minimum is observed near H/P ≈ 1.05, coinciding with the onset of overtopping; interaction between the upper and lower flow paths is a proposed explanation. Increasing pier number or length, or decreasing connection angle, generally increases predicted tangential velocity while reducing discharge capacity at a given head. At Q = 400 m3/s, increasing L from 12 to 20 m reduces the maximum inlet velocity magnitude from approximately 4.17 to 2.77 m/s while increasing predicted tangential velocity. These fixed-discharge comparisons include the accompanying change in head. The results describe the tested configurations; shaft velocities and air-core dynamics have not been independently validated.

Förderung

  • CCCC Yangtze River Construction and Development Group Co., Ltd.

Zitieren

APA

Hu, J., Ma, X., Zeng, B., Shi, W., & Dong, K. (2026). Effects of Submerged Swirl-Generating Pier Geometry on Discharge Capacity and Swirling Flow in an Annular-Weir Shaft Spillway. Water, 18(22), 2811. https://doi.org/10.3390/w18222811

Vancouver

Hu J, Ma X, Zeng B, Shi W, Dong K. Effects of Submerged Swirl-Generating Pier Geometry on Discharge Capacity and Swirling Flow in an Annular-Weir Shaft Spillway. Water. 2026;18(22):2811. doi:10.3390/w18222811

BibTeX
@article{Hu2026,
  author = {Hu, Junjie and Ma, Xudong and Zeng, Beijia and Shi, Weiwei and Dong, Ke},
  title = {Effects of Submerged Swirl-Generating Pier Geometry on Discharge Capacity and Swirling Flow in an Annular-Weir Shaft Spillway},
  journal = {Water},
  year = {2026},
  volume = {18},
  number = {22},
  pages = {2811},
  doi = {10.3390/w18222811}
}
Kostenlos starten →