Iron-Coated Pine Bark as Biosorbents for Textile Wastewater Treatment: A Sustainable Approach
Water · 18.12.2025 · 17 (24) · 3591
DOI: 10.3390/w17243591 ↗Kurz gefasst
Fachartikel in der Zeitschrift Water, online erschienen am 18.12.2025. Verfasst von Pedro Gonçalves und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 64 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Recovery and Resilience Plan, LSRE-LCM—Laboratory of Separation and Reaction Processes—Laboratory of Catalysis and Materials—funded by Fundação para a Ciência e a Tecnologia, I.P./MCTES, ALiCE.
Abstract (Originalsprache)
Dyes are widely used in textile processing and are frequently discharged without adequate treatment, posing risks to aquatic ecosystems through reduced water quality, toxicity to organisms, and long-term environmental degradation. To address the need for sustainable remediation solutions, this study investigated the use of pine bark (Pinus pinaster), an abundant forestry byproduct, as a low-cost biosorbent for textile dye removal. Powdered (1 mm) bark fractions were washed, dried, and modified through iron impregnation (10 wt.% Fe) via sonication in an FeCl3·6H2O solution, with one iron-coated variant subsequently subjected to thermal treatment at 400 °C under nitrogen (1 h) and hydrogen (3 h). Adsorption performance was evaluated using synthetic effluents containing Sirius Blue, Astrazon Red, and Sirius Yellow, individually and as a ternary mixture (80 mg/L each), with added NaCl and NaHCO3 to simulate realistic conditions. Thermally treated granular iron-coated bark showed the highest removal efficiency, achieving >90% dye elimination within 24 h without detectable iron leaching, along with strong iron retention (~80%) and a 53% thermal-treatment yield. Maximum adsorption reached 15.51 mg/g at 5.0 g/L, while lower adsorbent doses increased capacity (26.8 mg/g) but reduced overall removal (~83%). Kinetic analysis was dose-dependent: the pseudo-first-order model provided the best fit at 5.0 g/L, reflecting the rapid approach to equilibrium, whereas the Elovich model fitted best at 2.5 g/L (R > 0.99), consistent with heterogeneous surface interactions under limited adsorbent availability. These results demonstrate the potential of thermally treated iron-coated pine bark as an efficient and sustainable biosorbent for textile wastewater treatment.
Förderung
- Recovery and Resilience Plan
- LSRE-LCM—Laboratory of Separation and Reaction Processes—Laboratory of Catalysis and Materials—funded by Fundação para a Ciência e a Tecnologia, I.P./MCTES
- ALiCE
Zitieren
APA
Gonçalves, P., Pintor, A., Soares, O. S. G. P., Pereira, M. F. R., Botelho, C. M. S., & Ferreira, R. M. (2025). Iron-Coated Pine Bark as Biosorbents for Textile Wastewater Treatment: A Sustainable Approach. Water, 17(24), 3591. https://doi.org/10.3390/w17243591
Vancouver
Gonçalves P, Pintor A, Soares OSGP, Pereira MFR, Botelho CMS, Ferreira RM. Iron-Coated Pine Bark as Biosorbents for Textile Wastewater Treatment: A Sustainable Approach. Water. 2025;17(24):3591. doi:10.3390/w17243591
BibTeX
@article{Gonalves2025,
author = {Gonçalves, Pedro and Pintor, Ariana and Soares, Olivia S. G. P. and Pereira, Manuel F. R. and Botelho, Cidália M. S. and Ferreira, Ricardo M.},
title = {Iron-Coated Pine Bark as Biosorbents for Textile Wastewater Treatment: A Sustainable Approach},
journal = {Water},
year = {2025},
volume = {17},
number = {24},
pages = {3591},
doi = {10.3390/w17243591}
}
EUVIMED