Study on Sand Wear Testing and Numerical Simulation of a 500 MW Class Pelton Turbine
Water · 23.01.2025 · 17 (3) · 317
DOI: 10.3390/w17030317 ↗Kurz gefasst
Fachartikel in der Zeitschrift Water, online erschienen am 23.01.2025. Verfasst von Jialing Li und 9 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key Program of National Natural Science Foundation of China, Major Program of Sichuan Science and Technology of China.
Abstract (Originalsprache)
Pelton turbines frequently encounter significant sediment wear when operating in sandy river environments. The runner bucket of these turbines is particularly prone to wear, which results in considerable reductions in turbine efficiency and operational stability. This research focused on a large-scale Pelton turbine with a 500 MW standalone capacity in a sandy river setting. Numerical simulations of sand–water flow within the runner bucket were conducted using the volume of fluid (VOF) model, shear stress transport (SST) k-ω model, and the discrete phase model (DPM). Additionally, a sediment wear prediction model, based on wear tests conducted on a model turbine, was utilized to estimate sediment wear within the Pelton turbine bucket. The results indicated a maximum bucket wear rate of 2.61 × 10−7 mm/s. Specifically, the 04Cr13Ni5Mo runner bucket, typically made from stainless-steel wear-resistant material, is expected to experience over 5.62 mm of wear after one year of operation under rated conditions, emphasizing the severity of sediment wear. To prolong the operational life of the unit, further investigations into surface wear resistance treatments for the runner water buckets are recommended.
Förderung
- Key Program of National Natural Science Foundation of China
- Major Program of Sichuan Science and Technology of China
Zitieren
APA
Li, J., Pang, J., Qin, M., Liu, X., Hua, H., Wu, B., Zhang, H., Liu, J., Yu, Z., & Zeng, Y. (2025). Study on Sand Wear Testing and Numerical Simulation of a 500 MW Class Pelton Turbine. Water, 17(3), 317. https://doi.org/10.3390/w17030317
Vancouver
Li J, Pang J, Qin M, Liu X, Hua H, Wu B, et al. Study on Sand Wear Testing and Numerical Simulation of a 500 MW Class Pelton Turbine. Water. 2025;17(3):317. doi:10.3390/w17030317
BibTeX
@article{Li2025,
author = {Li, Jialing and Pang, Jiayang and Qin, Mengjun and Liu, Xiaobing and Hua, Hong and Wu, Baofu and Zhang, Haiku and Liu, Jitao and Yu, Zhishun and Zeng, Yongzhong},
title = {Study on Sand Wear Testing and Numerical Simulation of a 500 MW Class Pelton Turbine},
journal = {Water},
year = {2025},
volume = {17},
number = {3},
pages = {317},
doi = {10.3390/w17030317}
}
EUVIMED