Investigation and Improvement of Centrifugal Slurry Pump Wear Characteristics via CFD-DEM Coupling
Water · 24.10.2024 · 16 (21) · 3050
DOI: 10.3390/w16213050 ↗Kurz gefasst
Fachartikel in der Zeitschrift Water, online erschienen am 24.10.2024. Verfasst von Zengqiang Wang und 4 weiteren Autor:innen. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, China Postdoctoral Science Foundation, Open Research Fund Program of State key Laboratory of Hydroscience and Engineering.
Abstract (Originalsprache)
Centrifugal slurry pumps are extensively applied in industrial industries such as power metallurgy, petrochemicals, deep-sea mining, and other industrial fields. The primary objective of this research is to assess how conveying settings and particle characteristics influence the 100SHL4147 slurry pump’s collision and erosion properties. Firstly, the computational fluid dynamics–discrete element method (CFD-DEM) coupling model fully coupled particle–fluid co-flow numerical simulation interface is built by utilizing the C++ language and the results are proven with tests. Subsequently, the simulation examines the wear properties of different sections through which the flow passes in the 100SHL4147 centrifugal slurry pump. In addition, following theoretical guidance, the slurry pump impeller’s wear resistance performance can be improved by adjusting design factors such as the intake edge location and the blade wrap angle. The results are as follows. It is recommended to replace the impeller promptly due to the findings that indicate that the entire blade’s pressure surface is vulnerable to different degrees of erosion under high-concentration situations. When the particle size increased from 0.4 to 0.8 mm, the wear rate decreased by up to 15%, as fewer particles were transported, lowering the collision frequency. Conversely, smaller particles intensify component wear. Adjusting the blade wrap angle from 66° to 96° reduced impeller and volute wear by an estimated 20%, enhancing the durability but slightly decreasing the delivery capacity. Extending the blade’s leading edge toward the intake improved the flow capacity, although it increased the wear frequency from one-third of the pressure surface to the trailing edge.
Förderung
- National Natural Science Foundation of China
- China Postdoctoral Science Foundation
- Open Research Fund Program of State key Laboratory of Hydroscience and Engineering
- Taizhou Science and Technology Support Plan
Zitieren
APA
Wang, Z., Peng, G., Chang, H., Hong, S., & Ji, G. (2024). Investigation and Improvement of Centrifugal Slurry Pump Wear Characteristics via CFD-DEM Coupling. Water, 16(21), 3050. https://doi.org/10.3390/w16213050
Vancouver
Wang Z, Peng G, Chang H, Hong S, Ji G. Investigation and Improvement of Centrifugal Slurry Pump Wear Characteristics via CFD-DEM Coupling. Water. 2024;16(21):3050. doi:10.3390/w16213050
BibTeX
@article{Wang2024,
author = {Wang, Zengqiang and Peng, Guangjie and Chang, Hao and Hong, Shiming and Ji, Guangchao},
title = {Investigation and Improvement of Centrifugal Slurry Pump Wear Characteristics via CFD-DEM Coupling},
journal = {Water},
year = {2024},
volume = {16},
number = {21},
pages = {3050},
doi = {10.3390/w16213050}
}
EUVIMED