Study on Part-Load Cavitation in High-Specific-Speed Centrifugal Pump
Water · 01.08.2024 · 16 (15) · 2180
DOI: 10.3390/w16152180 ↗Kurz gefasst
Fachartikel in der Zeitschrift Water, online erschienen am 01.08.2024. Verfasst von Zhenhua Shen und 4 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Zhejiang Provincial Natural Science Foundation of China, Taizhou Science and Technology Plan Project, LEO Group Postdoctoral Program.
Abstract (Originalsprache)
Some high-specific-speed centrifugal pumps exhibit instability in terms of hydraulic performance and cavitation characteristics, and there’s a lack of reliable numerical models to guide the optimization of cavitation instability. This paper, by conducting a study on mesh independence, analyzes the cavitation curves and cavitation counters for various mesh combinations in the numerical model, The findings indicate that the boundary layer grid not only influences the location of peak points but also the size of the peak. To achieve a stable NPSH peak position, the y+ at the blade leading edge of high-specific-speed centrifugal pumps needs to be controlled between 20–80. The turbulence model, evaporation coefficient, and condensation coefficient were simulated using the orthogonal experimental design method, analyzing the impact of these parameters on the NPSH peak. A visual high-speed photography test rig was established, and rotating cavitation and sheet cavitation is found at part-load. By comparing the cavitation and pressure counters with high-speed photography images, a numerical model was obtained that closely mirrors the experimental cavitation characteristics.
Förderung
- Zhejiang Provincial Natural Science Foundation of China
- Taizhou Science and Technology Plan Project
- LEO Group Postdoctoral Program
Zitieren
APA
Shen, Z., Wang, C., Zhang, J., Qiu, S., & Lin, R. (2024). Study on Part-Load Cavitation in High-Specific-Speed Centrifugal Pump. Water, 16(15), 2180. https://doi.org/10.3390/w16152180
Vancouver
Shen Z, Wang C, Zhang J, Qiu S, Lin R. Study on Part-Load Cavitation in High-Specific-Speed Centrifugal Pump. Water. 2024;16(15):2180. doi:10.3390/w16152180
BibTeX
@article{Shen2024,
author = {Shen, Zhenhua and Wang, Chao and Zhang, Jinfeng and Qiu, Shijun and Lin, Rong},
title = {Study on Part-Load Cavitation in High-Specific-Speed Centrifugal Pump},
journal = {Water},
year = {2024},
volume = {16},
number = {15},
pages = {2180},
doi = {10.3390/w16152180}
}
EUVIMED